660668
53
Zoom out
Zoom in
Previous page
1/56
Next page
Estimated timing for laser light source replacement
Displays using the solid/blinking light of the “LIGHT” indicator. The “STANDBY/ON” indicator, which shows the operating
mode of the unit, is also displayed simultaneously.
* “LIGHT” indicator does not light up when “LED Indication” is set to “Off” (p. 37).
.
LIGHT WARNING
STANDBY/ON
GH
LIG
HT
If 40,000 hours have elapsed, the
brightness will be half the brightness at
shipment.
“LIGHT” lights up (orange)
Lights up when the “LD Current” gauge
reaches 95 and above. (When the Auto
Intensity function is On.)
Warning display
You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LIGHT” indicators. The
“STANDBY/ON” indicator, which shows the operating mode of the unit, is also displayed simultaneously.
The projector enters into Warning mode once the “WARNING” indicator is displayed. The power cannot be turned on
again under this condition.
Allow the projector to cool down for a while, then check the following.
Indicator Status (Solid/Blinking)
Blinking
Frequency
Description Check and Countermeasure
.
LIGHT WARNING
STANDBY/ON
WARNING
(Red)(*)Mode
Display
x1
Abnormality in the power supply
0
Check that nothing is blocking
the air inlets.
0
Check that the external
temperature is normal.
Countermeasure: Leave the unit
unoperated until it cools down.
After that, turn on the power again.
x2
Cooling fan stopped abnormally
x3 Internal temperature is
abnormally high
x4 External temperature is too high
x5 Abnormal circuit operation
.
LIGHT WARNING
STANDBY/ON
WARNING
LIGHT
Blinking
Simultaneously
(Red)
(Orange)
Mode
Display
x1
Abnormal circuit operation
x2
x3
.
LIGHT WARNING
STANDBY/ON
LIGHT
RN
WAR
NING
(Red)
(Orange)
Mode
Display
x1
LD Driver or LD light source
Error
Countermeasure: Leave the unit
unoperated until it cools down.
After that, turn on the power again.
x2 Wheel Error
x3 Color Sensor Error
x4 Inter Lock
If the Warning mode is activated again, wait for the cooling fan to stop, followed by pulling out the power plug from the
outlet.
Request for repair at your authorized dealer or a nearby service center.
(*) If the scheduled time for laser light source replacement is exceeded, the indicator may light up.
53
Others
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-VS2300ZG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-VS2300ZG in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info