804113
76
Zoom out
Zoom in
Previous page
1/125
Next page
HDMI EDID Setting
Mode
For changing the EDID mode of the “HDMI 1/HDMI 2” terminal. Set to “A” under normal condition. The images may not
be displayed on some old devices. In this case, try “B” or “C”.
Setting Description
AConfigures the EDID mode to “A”
Supports up to 8K60p x y z 5 6 7 and 4K120p.
BConfigures the EDID mode to “B”
Supports up to 4K60p.
CConfigures the EDID mode to “C”
Supports up to 1080p60.
* EDID (Extended Display Identification Data) refers to the information, such as supported resolutions, exchanged
between devices.
DSC
For configuring whether DSC transmission is allowed. Set to “On” under normal condition.
Setting Description
On Allows compressed video transmission
Off Prohibits compressed video transmission
* DSC (Display Stream Compression) is one of the lossy video signal compression transmission technologies.
HDR10+
For configuring whether HDR10+ transmission is allowed. To enjoy HDR10+ content, configure to “On”.
Setting Description
On Allows HDR10+ transmission
Off Prohibits HDR10+ transmission
MEMO
0The “HDMI EDID Setting” settings are saved separately for each input terminal. The name of the currently selected
input terminal is shown at the top right corner of the “HDMI EDID Setting” menu.
0To switch to configure the settings for a different input terminal, press the “INPUT” button on the remote control unit,
or press the ↑↓ key on the projector unit after turning off the menu screen.
FILMMAKER MODE
For configuring whether to switch “Picture Mode” automatically to “FILMMAKER MODE” when FILMMAKER MODE is
detected.
Setting Description
Auto Automatically switches “Picture Mode” to “FILMMAKER MODE” when
FILMMAKER MODE is detected.
Manual Does not automatically switch “Picture Mode” to “FILMMAKER MODE” when
FILMMAKER MODE is detected.
MEMO
0Displays a message asking whether to switch “Picture Mode” automatically when FILMMAKER MODE is detected
for the first time. If “No” is selected, “FILMMAKER MODE” will be configured to “Manual”. To enable automatic
switching, configure “FILMMAKER MODE” to “Auto”.
76
Adjust/Set
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-RS3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-RS3100 in the language / languages: English as an attachment in your email.

The manual is 9.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DLA-RS3100

JVC DLA-RS3100 User Manual - German - 122 pages

JVC DLA-RS3100 User Manual - Dutch - 122 pages

JVC DLA-RS3100 User Manual - French - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info