804110
100
Zoom out
Zoom in
Previous page
1/125
Next page
Projected image is dark
Check Action Refer to
Is the lamp near end of the rated hours?
4 8
Check the lamp time in the “Information” menu.
Prepare a new lamp unit or replace as soon as possible
when the lamp is near end of the rated hours.
P. 90
Is the aperture closed? Increase the value of the “Aperture” setting. P. 65
Is “LD Power”/“Lamp Power” set to
“Low”?
Set “LD Power”/“Lamp Power” to “High” P. 64
Is “Theater Optimizer” set to “On”? Press “Set” in the “Theater Optimizer” menu. P. 48
Check Picture Settings. Select different Picture Mode. P. 39
Video image appears horizontally (vertically) extended
Check Action Refer to
Is “3D Format” set to “Side by Side”? Set “3D Format” to “Auto” P. 38
Is “Anamorphic” set to a setting other
than “Off”?
Set “Anamorphic” to “Off” P. 83
Moire patterns appear on the screen
Check Action Refer to
Does the fabric of the screen have a
regular pattern?
Interference fringes may sometimes occur between the
fabric pattern and the pixels. Please consult the authorized
dealer.
Part of the video Image is missing
Check Action Refer to
Has screen mask been configured? Set “Mask” to “Off”. P. 83
Is “Anamorphic” set to a setting other
than “Off”?
Set “Anamorphic” to “Off”. P. 83
Is “Aspect” set to a setting other than
“Native”?
Set “Aspect” to “Native” P. 36
Remote control does not work
Check Action Refer to
Are the batteries correctly installed? Match the polarities (t s) correctly when loading the
batteries.
P. 25
Are the batteries exhausted? Replace with new batteries. P. 25
Is there an obstructing object between
the remote control and remote sensor?
Remove any obstructing object. P. 25
Is the remote control held too far away
from the unit?
Hold the remote control closer to the sensor during use. P. 25
Is remote control code correctly? Match the settings of the projector and the remote control.
The factory settings are both “A”.
P. 88
100
Troubleshooting
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-NZ7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-NZ7 in the language / languages: English as an attachment in your email.

The manual is 9.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DLA-NZ7

JVC DLA-NZ7 User Manual - German - 122 pages

JVC DLA-NZ7 User Manual - Dutch - 122 pages

JVC DLA-NZ7 User Manual - French - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info