804110
97
Zoom out
Zoom in
Previous page
1/125
Next page
Troubleshooting
Before sending the unit to your authorized dealer for repair, please check the following points.
The following symptoms are not malfunctions.
You do not need to worry about the following symptoms if there is no abnormality on the screen.
0A part of the top or front surface of the unit is hot.
0A creaking sound is heard from the unit.
0An operating sound is heard from the inside of the unit.
0Color smear occurs on some screens.
This unit is a digital device. This unit may become unable to operate normally due to external static or noise.
Perform the following operations when such malfunctions occur.
AIf the unit is in the Standby mode, pull out the power plug, followed by inserting it again
BPress the A button on the projector unit to turn on the power again
When “High Altitude Mode” is set to “On”, and “Lamp Power” is set to “High” during 3D mode, the fan will
make louder noise than usual since it is designed to run at high speed in 3D mode.
Power is not supplied
Check Action Refer to
Is the power cord disconnected? Insert the power cord (plug) firmly. P. 32
Is the lamp cover properly shut?
4 8
If the unit is in the Standby mode, remove the power plug
and close the lamp cover properly. After that, insert the plug
again.
P. 91
Is the unit in the Cool-down mode? After exiting the Cool-down mode, turn on the power again. P. 34
Is the unit in the Eco mode? Press the A button on the projector unit or the remote
control unit. After the “STANDBY/ON” indicator lights up in
red, press the C [ON] button.
P. 86
Power shuts down automatically
Check Action Refer to
Has “ECO Mode” been configured? Set “ECO Mode” to “Off”. P. 86
Has “Off Timer” been configured? Set “Off Timer” to “Off”. P. 86
Are the air inlets and exhaust vent
blocked?
Leave proper clearance when installing the unit. P. 21, 27
Is there a large amount of dirt attached to
the sponge filter?
Remove the dirt using a vacuum cleaner. P. 94
97
Troubleshooting
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC DLA-NZ7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC DLA-NZ7 in the language / languages: English as an attachment in your email.

The manual is 9.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC DLA-NZ7

JVC DLA-NZ7 User Manual - German - 122 pages

JVC DLA-NZ7 User Manual - Dutch - 122 pages

JVC DLA-NZ7 User Manual - French - 125 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info