56185
12
Zoom out
Zoom in
Previous page
1/52
Next page
CU-VD50EK
DVD Burner
INSTRUCTIONS
CU-VD50EK.book Page 1 Thursday, June 19, 2008 9:38 AM
2
Getting Ready to Copy to a DVD!
A Get ready a recommended disc
Use DVD-R, DVD-RW or DVD-R DL disc of the brands listed below.
DVD+R, DVD+RW and DVD-RAM discs cannot be used.
B Connect
C Press the power button to turn on the burner
The power lamp changes from blinking orange to steady orange.
DVD-R DVD-RW
DVD-R DL (Single-
sided double layer)
Brand
JVC, TDK,
Verbatim, SONY
JVC JVC, Verbatim
DVD-R DL (single-sided double layer) discs can be used only when the
burner is connected to a high definition Everio camera.
Use a commercially available cleaning cloth to wipe the disc gently if
there are any fingerprints or dirt. Applying too much strength will result in
scratches.
Do not use discs that are scratched.
When an AVCHD disc (P. 15) is inserted into a device that is not AVCHD-
compatible, you may not be able to eject the disc. To eject the disc, refer to the
instruction manual of your device.
Caution
Use the AC adapter to power
on the Everio camera.
Power button
To DC jack
USB cable
To DC jack
Protrusion
Insert the connector with the
protrusion to the burner.
Power lamp
CU-VD50
Everio
To power supply outlet
To power supply outlet
Basic Guide
CU-VD50EK.book Page 2 Thursday, June 19, 2008 9:38 AM
3
D Open the tray and insert the disc
E Close the tray
Push in until the tray snaps in.
F Open the LCD monitor
The tray cannot be opened/closed when the burner is off.
Caution
A Press the eject
button.
B Pull out
completely.
C Insert firmly into
place.
#2%!4%&2/-!,,
3%,%#4!.$#2%!4%
0,!9"!#+
&).!,):%
6)$%/
3%,%#4
3%4
The Everio camera turns on.
The power lamp on the burner
changes from orange to green light.
An hourglass ( ) is displayed when
the burner is recognising the disc.
When completed, the following screen
appears.
Pay attention to the following!
Do not touch the
recording side
Do not place any
objects on top
Do not topple
Do not subject to
mechanical shock
¹ Recording or playback may not function properly if the disc is scratched
or dirty.
CU-VD50EK.book Page 3 Thursday, June 19, 2008 9:38 AM
4
Copying Videos to a DVD
Operate on the Everio camera.
¹ Depending on the model connected, the on-screen display may differ from those
shown below.
A Select “CREATE FROM ALL”
B Select “ALL SCENES”
C Select “OK”
D Select “Yes”
E Select “EXECUTE”
F Press “OK”
Copy completed!
Select
(move up-down)
Confirm
(push in)
CREATE FROM ALL
SELECT AND CREATE
PLAYBACK
FINALIZE
SELECT SET
VIDEO
-%.5
ALL SCENES
UNSAVED SCENES
SELECT SET
CREATE FROM ALL
TOP
$6$$6$$,
-%.5
QUANTITY REQUIRED
SELECT SET
ALL SCENES
TOP
OK
RETURN
PREPARE AN EMPTY DISC
-%.5
DO YOU WANT TO MAKE
AN AUTOMATIC HEADLINE ON
THE DISC TOP MENU?
SELECT SET
ALL SCENES
TOP
Yes
No
$6$
 
-%.5
SELECT SET
ALL SCENES
TOP
EXECUTE
CANCEL
COMPLETED
SET
ALL SCENES
OK
Do not turn off the power or remove the USB cable while the the hourglass or the
copy in progress screen is displayed.
You can also choose to copy your favourite scenes. For details, refer to
the instruction manual of the Everio camera.
Note
CU-VD50EK.book Page 4 Thursday, June 19, 2008 9:38 AM
5
Playing Videos Stored on the DVD
A Connect this burner to the TV
B Remove the USB cable
The power lamp on the burner changes as follows.
When the USB cable is removed, the playback navigator appears automatically.
(About 40 seconds.)
C Use the selection keys on the remote control to select the video to
play back and press the ENTER button.
Green Blinking orange Orange
When the power lamp blinks slowly in red due to a drop in the burner’s interior
temperature, some functions will not work and there will be no image displayed on
the TV screen. Wait until the power lamp stops blinking in red before operating this
burner.
Connect to the TV with
an Audio/Video cable.
To DC jack
TV
For details, refer to “Connecting to the TV” (P.12, 13).
Red
White
Yellow
Red Yellow
White
Power lamp
Remove the USB cable
To power
supply outlet
1/2
(Playback navigator screen on the TV)
DIGEST PLAYBACK
01.06.2008 09:51 01.06.2008 11:45 01.06.2008 17:09
An unfinalised disc
cannot be played back
properly. Refer to the
instruction manual of the
Everio camera and
finalise the disc.
Caution
01.08.2008 13:42 01.08.2008 15:15 01.08.2008 17:32
Playback begins!
CU-VD50EK.book Page 5 Thursday, June 19, 2008 9:38 AM
6
This burner enables DVDs of videos
recorded with the JVC Hard Disk Camera to
be created without using a PC.
If you want to edit videos recorded with the camera and create
your original DVDs, use the software provided with the camera
for editing and creating DVDs.
A provided data writing software Power2Go 5.5 Lite can be used for
writing data. However, it cannot be used to edit videos or create DVDs.
The burner does not include support for Macintosh.
Dear Customer,
Thank you for purchasing this burner. Before use, please read
the safety information and precautions contained in pages 6 and
7 to ensure safe use of this product.
Safety Precautions
IMPORTANT:
In the event that any of the following occur, remove the plug and
make a request for repair to the dealer.
Smoke or abnormal odour is emitted
Damage from being dropped
Water or an object enters inside
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT
USES A VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO
NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE
DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE
INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
This unit applies to the standard “IEC60825-1:2001” for laser
products.
The socket-outlet shall be installed near the equipment and shall
be easily accessible.
ATTENTION:
This unit contains microcomputers. External electronic noise or
interference could cause malfunctioning. In such cases, switch
the unit off and unplug the mains power cord. Then plug it in
again and turn the unit on. Take out the disc. After checking the
disc, operate the unit as usual.
CAUTION:
To avoid electric shock or damage
to the unit, first firmly insert the small
end of the power cord into the AC
Adapter until it is no longer wobbly,
and then plug the larger end of the
power cord into an AC outlet.
The mains plug shall remain readily operable.
Remove the mains plug immediately if the burner functions
abnormally.
If malfunctioning occurs, stop using the unit immediately and
consult your local JVC dealer.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated.
Do not recharge, disassemble, heat above 100 ؇ C or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo,
Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is incorrectly
replaced.
Dispose of used battery promptly.
Keep away from children.
Do not disassemble and do not dispose of in fire.
WARNING:
Batteries shall not be exposed to excessive heat such as direct
sunshine, fire or the like.
Dear Customer,
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic compatibility
and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old
Equipment and Batteries
[European Union]
These symbols indicate that the
electrical and electronic
equipment and the battery with
this symbol should not be
disposed of as general household
waste at its end-of-life. Instead,
the products should be handed
over to the applicable collection
points for the recycling of electrical
and electronic equipment as well
as batteries for proper treatment,
recovery and recycling in
accordance with your national
legislation and the Directive 2002/
96/EC and 2006/66/EC.
By disposing of these products
correctly, you will help to conserve natural resources and will help
to prevent potential negative effects on the environment and
human health which could otherwise be caused by inappropriate
waste handling of these products.
For more information about collection points and recycling of
these products, please contact your local municipal office, your
household waste disposal service or the shop where you
purchased the product.
Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page
www.jvc-europe.com
to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance
with applicable national legislation or other rules in your country
for the treatment of old electrical and electronic equipment and
batteries.
If this symbol is shown, it is only valid in the
European Union.
The C/B button does not completely shut off mains power from
the unit, but switches operating current on and off. ABB shows
electrical power standby and ACB shows ON.
Notice:
The sign Pb below the symbol
for batteries indicates that this
battery contains lead.
Products
Battery
CU-VD50EK.book Page 6 Thursday, June 19, 2008 9:38 AM
7
SOME DO’S AND DON’TS ON THE SAFE
USE OF EQUIPMENT
This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment, care
must be taken if you are to obtain the best results
and safety is to be assured.
DO read the operating instructions before you attempt to use the
equipment.
DO ensure that all electrical connections (including the mains plug,
extension leads and interconnections between pieces of
equipment) are properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw the mains
plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any doubt
about it working normally, or if it is damaged in any way
^ switch
off, withdraw the mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended unless
it is specifically stated that it is designed for unattended operation
or has a standby mode. Switch off using the switch on the
equipment and make sure that your family knows how to do this.
Special arrangements may need to be made for infirm or
handicapped people.
DON’T use equipment such as personal stereos or radios so that
you are distracted from the requirements of road safety. It is illegal
to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example with
curtains or soft furnishings. Overheating will cause damage and
shorten the life of the equipment.
DON’T use makeshift stands and NEVER fix legs with wood
screws
^ to ensure complete safety always fit the
manufacturer’s approved stand or legs with the fixings provided
according to the instructions.
DON’T allow electrical equipment to be exposed to rain or
moisture.
ABOVE ALL
NEVER let anyone especially children push anything into holes,
slots or any other opening in the case
^ this could result in a
fatal electrical shock;
NEVER guess or take chances with electrical equipment of any
kind
^ it is better to be safe than sorry!
Safety Precautions for the Burner
Be sure to observe the following precautions. Failing to do so may
result in electric shock, fire, injury, or malfunction.
Do not disassemble, dismantle, or modify the equipment.
Requests for repair and inspection should be made to the dealer.
Do not insert metal or combustible objects or pour water or other
liquids inside the burner.
Turn off the power when connecting equipment.
Remove the plug when the burner will not be used for a
prolonged time or prior to cleaning (electricity flows through the
equipment even when the power is off).
Do not block the ventilation holes of the burner.
Do not use where there is condensation. Suddenly carrying the
burner from a cold location to a hot location may result in the
formation of drops, which may cause a malfunction or failure.
Do not cause the burner to vibrate when discs are in.
Safety Precautions for Accessories
When using the AC adapter, the power cord, and the USB cable,
be sure to observe the following precautions. Failing to do so
may result in electric shock, fire, injury, or malfunction.
Do not insert or remove the plug when your hands are wet.
Fully insert the plug into the outlet.
Keep dust and metal objects away from the plug.
Do not damage the cord.
Place the cord where it will not trip someone up.
Do not use when thunder can be heard.
Do not dismantle.
Do not use for any product other than this one.
Do not play the provided CD-ROM with an audio player. Doing so
may damage the circuits or speakers.
Safety Precautions for Discs
Do not use the following discs.
Cracked discs
Deeply scratched discs
Installation
Do not install in any of the following locations.
Humid location
Location of 60 °C or above
Location subject to direct sunlight
Location where overheating is likely
Dusty or smoky locations
Locations subject to oily smoke or steam such as a kitchen
counter or beside a humidifier
Unstable location
Bathroom
Dusty places
Slanted location
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this
equipment.
If the plug fitted is not suitable for the power points in your home
or the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your
dealer.
In the unlikely event of the plug fuse failing be
sure to replace the fuse only with an identical
approved type, as originally fitted, and to replace
the fuse cover. If the fuse fails again consult your
nearest JVC dealer.
If nonetheless the mains plug is cut off be sure to remove the
fuse and dispose of the plug immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains plug then follow
the instructions given below:
DO NOT make any connection to the Larger Terminal coded E or
Green.
The wires in the mains lead are coloured in accordance with the
following code:
If these colours do not correspond with the terminal identifications
of your plug, connect as follows:
Blue wire to terminal coded N (Neutral) or coloured Black.
Brown wire to terminal coded L (Live) or coloured Red.
If in doubt
^ consult a competent electrician.
Blue to N (Neutral) or Black
Brown to L (Live) or Red
ATTENTION:
On placing the unit:
Some TVs or other appliances generate strong magnetic fields.
Do not place such appliances on top of the unit as it may cause
picture disturbance.
When moving the product:
Press C/B to turn off the power, and wait at least 30 seconds
before unplugging the power cord. Then, wait at least 2 minutes
before moving the product.
CU-VD50EK.book Page 7 Thursday, June 19, 2008 9:38 AM
8
Contents
z Safety Precautions .................................................................................................. 6
z Getting Started......................................................................................................... 9
Accessories ............................................................................................................... 9
Placing the Burner..................................................................................................... 9
z Names and Functions of Each Part ..................................................................... 10
Front and Top Panel................................................................................................ 10
Rear Panel............................................................................................................... 10
Remote Control ....................................................................................................... 11
z Connecting to the TV ............................................................................................ 12
Connecting to a TV with HDMI Input Terminal ........................................................ 12
Connecting to a TV with Component Video Input Connectors ................................ 13
Connecting to a TV with Audio/Video Input Connectors.......................................... 13
z Copying Everio Video to a DVD ........................................................................... 14
Connecting to an Everio Camera ............................................................................ 14
Creating AVCHD Disc/Data Disc/DVD-Video.......................................................... 15
z Copying from PC to DVD ...................................................................................... 16
Connecting to a PC ................................................................................................. 16
Copying to a DVD.................................................................................................... 16
Computers That Can Be Used ................................................................................ 17
Installing CyberLink Power2Go 5.5 Lite .................................................................. 18
CyberLink Power2Go 5.5 Lite Contact Information ................................................. 20
z Folder Configuration ............................................................................................. 21
When Copying from High Definition Everio to Data Disc......................................... 21
When Copying from High Definition Everio to AVCHD Disc.................................... 22
When Creating and Storing Desired Folders and Files on a PC ............................. 22
z Playing Images Stored on the DVD...................................................................... 23
Viewing Images Copied from the High Definition Everio ......................................... 23
Viewing DVD-Video Copied from Everio ................................................................. 27
z Changing the Playback Settings.......................................................................... 29
z Operate in Conjunction with TV via HDMI........................................................... 31
z Viewing High Quality Images ............................................................................... 33
z Settings Menu........................................................................................................ 34
Menu Operation Procedures ................................................................................... 34
Settings Menu Items and Descriptions .................................................................... 35
z Screen Displays..................................................................................................... 39
z Troubleshooting .................................................................................................... 41
z Error Messages...................................................................................................... 45
z Other Information .................................................................................................. 46
z Specifications ........................................................................................................ 48
CU-VD50EK.book Page 8 Thursday, June 19, 2008 9:38 AM
9
Getting Started
If there are any items missing, please consult your authorised dealer.
o Horizontal orientation
Take note of the top and bottom of the burner and place it in the horizontal
orientation.
o Vertical orientation
Align the groove on the bottom of
this burner with the bulge on the
stand and fix the burner securely on
the stand.
Accessories
Do not use the provided AC adapter and power cord for other devices. In
addition, do not use AC adapter and power cord other than those provided
with this burner. Doing so may result in electric shock or fire.
Placing the Burner
AC adapter
(AP-V50U)
Power cord
USB cable
Mini A – Mini B type
Audio/Video cable
DVD-R (blank disc) x 1
CD-ROM (data writing
software) x 1
Instruction manual
(this manual), other
printed material
Stand
Remote control
(RM-V55U)
Low side
Groove
High side
CU-VD50EK.book Page 9 Thursday, June 19, 2008 9:38 AM
10
Names and Functions of Each Part
Front and Top Panel
Rear Panel
Power (On/Off)
Stop
Play
Pause
Reverse skip
Forward skip
Ventilation holes
Do not block these
ventilation holes.
To eject tray (P. 3)
Access lamp
Tray
Remote
control sensor
Power lamp
Power on: orange
USB connected: green
Connect to the TV’s component
video input connectors (P. 13)
Connect to the Everio camera (P. 14)
Connect to the PC (P. 16)
Connect to the
AC adapter
Connect to the TV’s audio input
connectors (P. 13)
Connect to the TV’s
HDMI input terminal
(P. 12)
Connect to the TV’s video
input connector (P. 13)
CU-VD50EK.book Page 10 Thursday, June 19, 2008 9:38 AM
11
Remote Control
If the burner responds poorly to the remote control, the battery of the
remote control is weak. Replace it with a new battery. Insert correctly
according to the e and d directions indicated.
If problem occurs while using the remote control, remove the battery
and insert it again before operating the remote control.
Basic playback
operations
(P. 25, 28)
Power (On/Off)
To perform basic setup
(P. 34)
To display the playback
navigator (P. 23)
To display the tool menu (P. 25)
To display the playback menu
(P. 29)
To change the output
resolution of the image (P. 33)
To display information on the
screen (P. 39)
To display the playback
navigator (P. 27)
To select/confirm
To return to the previous
screen
Note
o When using the remote
control for the first time
o When replacing the battery
Pull out the insulation sheet
Lithium battery
CU-VD50EK.book Page 11 Thursday, June 19, 2008 9:38 AM
12
Connecting to the TV
Connecting to a TV with HDMI Input Terminal
Images can only be displayed on a High-bandwidth Digital Content
Protection (HDCP) monitor.
We recommend using the Category 2 HDMI cable (High Speed cable)
for viewing in higher picture quality.
TV
This burner
HDMI input
HDMI cable (not provided)
Note
CU-VD50EK.book Page 12 Thursday, June 19, 2008 9:38 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC CU-VD50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC CU-VD50 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC CU-VD50

JVC CU-VD50 User Manual - German, Dutch - 104 pages

JVC CU-VD50 User Manual - French, Italian - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info