56697
20
Zoom out
Zoom in
Previous page
1/32
Next page
17
Using the Tuner
To Change the FM Reception
Mode
(Using the Remote Control)
When you are tuned into an FM stereo broadcast, the
STEREO indicator lights up and you can hear stereo ef-
fects.
If an FM stereo broadcast is hard to receive or noisy, you
can select Monaural mode. Reception improves, but you
lose stereo effect.
Press the FM MODE button on the Remote Control
so that the MONO indicator lights up on the dis-
play.
To restore the stereo effect,
press the FM MODE button
on the Remote Control so that the MONO indicator goes off.
Receiving FM Stations with RDS
(Using the Remote Control)
You can use the RDS (Radio Data System) by using the Re-
mote Control.
RDS allows FM stations to send additional signals with
their regular programme signals. For example, the stations
send their station names, and information about what type
of programmes they broadcast, such as sports or music, etc.
This unit can receive the following types of RDS signals:
PS (Programme Service):
shows commonly known station names.
PTY (Programme Type):
shows types of broadcast programmes.
RT (Radio Text):
shows text messages the station sends.
What information can RDS signals provide?
The display shows RDS signal information that the station sends.
To show the RDS signals on the display
Press the DISPLAY MODE button while listening
to an FM station.
Each time you press the button, the display changes to show
information in the following order:
PS (Programme Service):
While searching, WAIT PS appears, then station name is
displayed. NO PS appears if no signal is sent.
PTY (Programme Type):
While searching, WAIT PTY appears, then broadcast
programme type is displayed. NO PTY appears if no sig-
nal is sent.
RT (Radio Text):
While searching, WAIT RT appears, then a text message
sent by the station is displayed. NO RT appears if no signal
is sent.
Station Frequency:
Station frequency (non-RDS service)
If searching finishes at once, “WAIT PS”, “WAIT PTY” and
“WAIT RT” will not appear on the display.
If you press the DISPLAY MODE button while listening to
an AM (MW/LW) station, the display only shows station
frequency.
RDS is not available for AM (MW/LW) broadcasts.
MONO
FM MODE
PS PTY RT Frequency
DISPLAY
MODE
VS-DT6-9R(B)_EN.book Page 17 Thursday, January 17, 2002 1:26 PM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC CA-VSDT9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC CA-VSDT9 in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC CA-VSDT9

JVC CA-VSDT9 User Manual - German, Dutch, French - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info