57206
19
Zoom out
Zoom in
Previous page
1/72
Next page
Basic operations
14
The K2 function is designed to provide natural
sound by improving the playback sound from low-
bit-rate digital sources.
The function compensates for sound waves dissi-
pated during digital recording compression to
approximate the original analog sound. Sound is
reproduced with more bits (24 bit) and a wider
range of frequency (128 kHz, 176.4 kHz or
192 kHz).
Press [K2] on the remote control or on
the main unit.
When the K2 function is activated, the [K2] lamp
(button) on the main unit lights up.
Each time you press [K2], the display changes
as follows.
- “K2 MODE1”:
Plays back a digital source with non-com-
pressed sound signals (linear PCM). Realisti-
cally reproduces the sound of the master
source.
- “K2 MODE2”:
Plays back a digital source with compressed
sound signals (Dolby digital, DTS, MP3, WMA
or WAV). This mode produces the same effect
as “K2 MODE1” for compressed sound.
- “K2 MODE3”:
Plays back a digital source with non-com-
pressed sound signals (linear PCM) and a
broader sound field than that of “K2 MODE1”.
- “K2 MODE4”:
Plays back a digital source with compressed
sound signals (Dolby digital, DTS, MP3, WMA
or WAV). This mode produces the same effect
as “K2 MODE3” for compressed sound.
-“K2 OFF:
Cancels the K2 function.
NOTE
The original range of frequency is automatically
detected and extended to a specific range.
You can adjust the volume level for the left and
right surround sound and the subwoofer sound
respectively.
1 Press [SPK LEVEL] repeatedly to
select “SURR” or “SUBWFR” in
the display window.
• “SURR” refers to the left and right surround
sound.
• “SUBWFR” refers to the subwoofer sound.
2 Press [LEVEL +] or [LEVEL
]
repeatedly to adjust the volume
level.
The adjustable volume range is from -6 to +6.
Press [SURROUND].
Each time you press [SURROUND], the display
changes in the display window as follows.
-“AUTO SUR
When a multi-channel signal is input, surround
sound is automatically produced.
- “MOVIE”
Surround sound suitable for a movie or multi-
channel signal is produced.
- “WIDE/2CH”
When a 2ch signal is input, surround sound is
produced. The sound is broader than the one
with “MOVIE”.
-“SUPER W
Surround sound broader than the one with the
“WIDE/2CH” is produced.
NOTE
Depending on the signal type, surround sound
may not be produced as the surround mode set-
ting.
During playback, when you change the surround
mode setting, sound from the [DIGITAL OUT]
terminal may be intermittent. Before recording
sound to an external device, select the desired
surround mode setting.
This function does not work for a JPEG/ASF/
DivX/MPEG1/MPEG2 file.
Enhancing the playback
sound (K2) (Only for NX-F7)
Adjusting the volume level
for surround/subwoofer
sound
Selecting the surround mode
NX-F3_NX-F7[B]-04.fm Page 14 Wednesday, March 26, 2008 1:47 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC CA-NXF3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC CA-NXF3 in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of JVC CA-NXF3

JVC CA-NXF3 User Manual - German - 139 pages

JVC CA-NXF3 User Manual - Dutch - 139 pages

JVC CA-NXF3 User Manual - French - 139 pages

JVC CA-NXF3 User Manual - Italian - 139 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info