656266
21
Zoom out
Zoom in
Previous page
1/41
Next page
PELLET BURNING STOVES
INSTALLATION AND MAINTENANCE MANUAL
21
Switching on / switching off
The heater switching on and switching off is
performed through the ON/OFF key
After switching on, the message,
"CLEANING" will be shown on first, in order
to clean the fire pot.
The switching on Stage, which has the duration of
about 5-15 minutes, are necessary to the resistance
to carry the pellets at the switching on
temperature, (depends from the heater). The
switching on procedure is showed from a passage
set showed in the display as previous one and
then:
In the same way, push , then at the
switching off Period, the message shows:
Thirdly,After second phase is showed from the
message ‘FEEDING’. In this phase are performed
the chimney verification operations and the pellets
will be loaded in the melting pot. The successive
phase will be showed from the inscription
“Lighting”. This state remains up to when the
smokes temperature doesn’t exceed the planned
threshold.
After the temperature in the stove is cold
enough, finally, the phrase' GOODBYE is
displayed.
When the Lighting phase is finished, some
minutes will spend necessary for the flame
stabilization. This phase is showed from the
message ‘STABILIZATION” which finishes
after some minutes going up at the work phase
!! ATTENTION !!
During the flame switching off phase and exchanger cooling, Normally it isn’t allowed to switch on again
the heater up to the operation end; this state is highlighted from the message ‘SWITCHING OFF’
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Just Fire NB-B18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Just Fire NB-B18 in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info