1.2. OPERATING INSTRUCTIONS
• Turn off the heater in case of failure or malfunction.
• NEVER manually load the pellet into the burner.
• The accumulation of unburned pellets in the burner after repeated "misfire" must be removed before
proceeding with a new ignition.
• Do not wash the inside of the stove with water.
• Do not wash the stove with water. Water may enter the unit and damage the electrical insulation,
causing electric shock.
• Do not expose your body to hot air for a long time. Do not overheat the room where you are
staying and where the stove is installed. This can damage the physical condition and cause health
problems.
• Do not expose to direct the flow of hot air plants or animals. It could have harmful effects on
plants or animals.
• Do not use other fuel other than DIN PLUS Certified – ONORM wood pellets .
• Install the stove in a suitable location which has available all necessary facilities required such as
fire prevention facilities and all necessary utilities are available such as – but not limited - power
supplies (air and electric) and exhaust fume, in conformity with the provisions in force.
• The storage of the stove and the ceramic coating must be stored in a dry and humidity free premises.
• It is recommended to place the stove directly on the floor , and whereas this floor is made of flammable materials ,
in this case it is required to isolate properly.
• Never turn on any heater with flammable materials in the event of failure of the ignition system.
INFORMATION
In case of any problems, get in touch with your dealer, or a qualified engineer authorised by HANKS, and if a repair
is necessary, insist on the use of original spare parts.
Use only the fuel recommended by HANKS (for Italy pellets with a diameter of 6 mm and for other European
countries with a diameter of 6-8 mm) and provided only with an automatic supply system.
Periodically check and clean the smoke outlet ducts (connection to the flue pipe).
Accumulated unburnt pellets in the burner after repeated failed ignitions must be removed before
1.3. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a appliance separately avoids possible negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy
