28
4 Permanent settings in programming mode
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’
is displayed.
T Press the
‘Units’ button.
‘Units’
T Press the ‘oz’ button.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine settings 1 (4/6)’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Machine settings 1 (4/6)’/ ‘Factory setting’
you can reset various settings to their factory settings:
U
‘Machine’
U
All user settings (apart from the ‘filter’ and ‘water hardness’)
are reset to factory settings. Your JURA then switches off.
U
‘Products’
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
‘All products’
U
The settings (amount of water, aroma, temperature etc.) for
all products are reset to the factory settings.
U
‘Display’
U
All display settings are reset to the factory settings.
Example:Proceed as follows to reset the values for
‘Espresso’ to the
factory settings.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/6)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings 1 (4/6)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Products’ button.
Restore factory settings
