41
5 Maintenance
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switchk to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500ml.
‘Please select product:’ appears on the display. The filter is
now activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E CLARIS filter cartridges are available from specialised dealers.
Precondition:
‘Change the filter’ is displayed and the P buttonlights
up.
O T Press the P button.
‘Maintenance status(1/7)’
T Press the ‘Change the filter’ button.
‘Approximate duration 2 min.’
T Press the ‘Start’ button.
‘Use only original JURA maintenance products!’
T Press the ‘Start’ button again.
‘Change filter.’
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge.
T Fit the filter extension on top of a new filter cartridge.
Changing the filter