33
4 Permanent settings in programming mode
Example:Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Machine
settings(4/7)’
is displayed.
T Press the
‘Factory setting’ button.
‘Factory setting’
T Press the ‘Product’ button.
T Press the
‘Espresso’ button.
‘Reset this product to the factory setting?’
T Press the ‘Yes’ button.
‘Saved’ appears briefly on the display.
‘Factory setting’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Maintenance settings(6/7)’ you can adjust
the following settings for the switch-on rinse and milk system rinse:
U
‘Switch-on rinse’/ ‘Manual’
U
The switch-on rinse must be started manually.
U
‘Switch-on rinse’/ ‘Automatic’
U
The switch-on rinse is started automatically.
U
‘Rinse the milk system’/ ‘Manual’
U
You are prompted to rinse the milk system immediately
after preparation of a speciality coffee with milk.
U
‘Rinse the milk system’/ ‘Automatic’
U
Milk system rinsing is automatically initiated approx. 30 sec-
onds after preparation of a speciality coffee with milk.
Example:Proceed as follows to make the machine rinse the milk
system automatically after preparing a speciality coffee with milk.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Mainte-
nance settings(6/7)’
is displayed.
Rinses
