28
4 Permanent settings in programming mode
g T Turn the Rotary Switch to change the setting for the amount
of milk to
‘20sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Interval’ button.
g T Turn the Rotary Switch to change the setting for the interval
to
‘40sec.’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
T Press the
‘Next’ button.
T Press the
‘Volume’ button.
g T Turn the Rotary Switch to change the setting for the amount
of water to
‘40ml’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Latte macchiato’
O T Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings(3/7)’/ ‘Classic-library’ you
will find all the products stored as standard in your IMPRESSA. You
can move any of these products to your preferred position on the
start screen and make it one of your favourites.
You can also change the products shown in the product selector. To
do this, go to the programme item
‘Product settings(3/7)’/ ‘Pro-
gramming’
and press the ‘Remove from product selector’ button to
delete a product or products. In the programme item
‘Product set-
tings(3/7)’
/ ‘Classic-library’, press the ‘Add to product selector’ but-
ton to add a product or products again.
Example:The
‘2 espressi’ product appears in the bottom right-hand
corner of the start screen.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status(1/7)’
g T Turn the Rotary Switch until the programme item ‘Product
settings(3/7)’
is displayed.
Adding products to the
start screen
