27
4 Permanent settings in programming mode
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk for a
latte macchiato from
16 SEC to 20 SEC, the interval from
30SEC to 20SEC and the amount of water from 45ML to
40ML.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCT / SELECT PRODUCT
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To change the setting for a double product, press the corre-
sponding button twice within two seconds.
q T Press the Latte Macchiato button.
1LATTE MAC. / COFFEE 45ML
k T Press the Rotary Switch to enter the programme item.
1LATTE MAC. / COFFEE 45ML
g T Turn the Rotary Switch until 1LATTE MAC. / COFFEE
40ML
is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1LATTE MAC. / COFFEE 40ML
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
16SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
1LATTE MAC. / MILK 16SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
20SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1LATTE MAC. / MILK 20SEC
g T Turn the Rotary Switch until 1LATTE MAC. / PAUSE
30 SEC is displayed.