45
5 Maintenance
T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
PRESS BUTTON, the Maintenance button c lights up.
T Refit the cappuccino frother.
T Place one receptacle under the hot-water and coffee spout
and another under the cappuccino frother.
c T Press the Maintenance button.
MACHINE IS DECALCIFYING, water flows out of
the cappuccino frother and the hot-water spout.
UNIT IS HEATING, RINSING, water flows out of the
coffee spout.
The operation stops automatically,
TRAY / GROUNDS
EMPTY.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
Descaling is now complete. The IMPRESSA heats up and is
once more ready for use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
Coffee beans may be covered with a slight oil film which remains on
the walls of the bean container. These traces may negatively affect
the coffee result. For this reason clean the bean container from time
to time.
Precondition:
COFFEE READY / FILL BEANS is displayed.
k T Switch the machine off with the On/Off button.
3 T Switch the machine off at the power switch.
T Open the bean container cover and remove the aroma pres-
ervation cover.
T Clean the bean container with a soft, dry cloth.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
Cleaning the bean
container
