24
3 Familiarising yourself with the control options
Example: Proceed as follows to prepare a 110 ML cup of coffee.
Precondition:
COFFEE READY is shown on the display.
Place a cup under the coffee spout.
o T Press the Coffee button.
The grinding operation starts.
1 COFFEE appears on the
display, and then the strength is shown.
g T Turn the Rotary Switch during the brewing operation until
110 ML is displayed.
The set amount of water flows into the cup. Preparation stops
automatically.
COFFEE READY appears on the display.
It is easy to make permanent settings for the amount of water for all
coffee and milk specialities as well as hot water according to the cup
size. As in the following example, adjust the amount of water once.
Every time you prepare a drink in the future, this amount of water
will be dispensed.
The permanent settings for adapting the amount of water to the
cup size for all coffee and milk specialities as well as hot water follow
this model.
Example: To enter permanent settings for the amount of water for
a ristretto, proceed as follows.
Precondition:
COFFEE READY is shown on the display.
Place an espresso cup under the coffee spout.
u T Press and hold the Ristretto button.
1 RISTRETTO and the coffee strength is displayed.
u T Hold the Ristretto button down until
ENOUGH? / PRESS
BUTTON appears.
u T Release the Ristretto button.
Coffee preparation starts and the ristretto flows into the
cup.
Press any button as soon as enough ristretto has flowed into
the cup.
Preparation stops automatically.
CONFIRMED √ appears
briefly on the display. The set amount of water for a ristretto
is saved as a permanent value.
COFFEE READY is shown
on the display.
You can alter these settings at any time by repeating the
above procedure.
T
T
T
E
Changing the amount of
water during preparation
Changing the amount of
water during preparation
Entering a permanent
setting for the amount
of water for a cup size
Entering a permanent
setting for the amount
of water for a cup size
