Manual Jura IMPRESSA XS90 One Touch (page 26 of 58) (English)

534496

Zoom out

Zoom in

1/58

3 Preparation at the touch of a button

T Close the cover of the filler funnel for pre-ground coffee.

o T Press the 1 Coffee button.

1 COFFEE, the pre-set amount of water flows into the cup.

Preparation stops automatically.

ENJOY appears on the

display.

COFFEE READY is then displayed.

E This chapter applies to the Professional and Easy Cappuccino

Frothers.

There are two options for preparing hot milk or milk foam:

Z Milk portion z

U The preset quantity of milk is then prepared.

Z Milk n

U Milk is prepared until preparation is interrupted by pressing

any button.

Example: Proceed as follows to prepare milk foam.

Precondition:

COFFEE READY is displayed.

T Take the protective cover off the frother.

T Attach the milk pipe to the frother. For a milk carton/bottle

use the long pipe, for a milk container the short pipe.

T Insert the other end into a milk carton/bottle or connect it to

the milk container.

T Place a cup under the frother.

E If you are using the Professional Cappuccino Frother, turn

the selector switch to the Milk Foam position p.

E If you want to heat the milk, turn the selector switch of the

Professional Cappuccino Frother to the Milk position t.

ö T With the selector switch select the milk portion symbol z.

ä T Press the selector switch.

MILK, the milk foam is being prepared. Preparation stops

automatically when the pre-set amount of milk is reached.

COFFEE READY is shown on the display.

To ensure that the frother works perfectly, you should rinse and

clean it regularly. The description for this can be found in Chapter 5

‘Maintenance – Cappuccino frother’.

Hot milk and milk

foam

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA XS90 One Touch in the language / languages: English as an attachment in your email.

The manual is 4,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA XS90 One Touch

Jura IMPRESSA XS90 One Touch User Manual - German - 64 pages

Jura IMPRESSA XS90 One Touch User Manual - Dutch - 60 pages

Jura IMPRESSA XS90 One Touch User Manual - French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Jura IMPRESSA XS90 One Touch Manual

Product: