38
5 Permanent settings in programming mode
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
SELECT PRODUCT
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
PRODUCTS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can reset the values of all products as well as cappuccino and
latte macchiato individually to the works setting.
Example: Proceed as follows to reset the values of 1 Espresso to the
works setting.
Precondition: The IMPRESSA is switched off (standby).
T Open the cover of the Rotary Switch.
T Press the Rotary Switch and the 1 Espresso button for two
seconds at the same time until
1 ESPRESSO OK
appears.
The values of 1 Espresso are then reset to the works setting.
The IMPRESSA is switched off (standby).
With the energy-saving mode (Energy Save Mode, E.S.M.
©
) the
machine requires up to 60% less energy. You can set various energy-
saving modes on your IMPRESSA:
Z SAVE NO
U Your IMPRESSA is continuously ready for use.
U All coffee and milk products, as well as hot water, can be
prepared without having to wait.
Z SAVE LEVEL 1
U Your IMPRESSA is only continuously ready for use for coffee
products and hot water.
U The machine has to heat up before milk preparation.
Z SAVE LEVEL 2
U Approx. 5 minutes after the last preparation the IMPRESSA
switches to the energy-saving temperature and is not ready
for use.
U Before coffee, hot water or milk can be prepared, the machine
has to heat up.
Resetting the products to
works settings
Energy-saving mode
