534493
45
Zoom out
Zoom in
Previous page
1/52
Next page
45
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
When preparing a latte
macchiato, the typical
three layers do not
form.
TTurn the setting wheel of the cappuc-
cino frother to the far right and the Milk
Foam positionü.
TChange the length of the interval to at
least 30 seconds in programming mode
(see Chapter 4 ‘Permanent settings in
programming mode – Product settings’).
Insufficient foam is
produced when the
milk is frothed or milk
sprays from the
cappuccino frother.
The cappuccino frother is
dirty.
T Rinse and clean the cappuccino
frother(see Chapter 5 ‘Maintenance –
Rinsing the cappuccino frother’).
TCheck that the air intake pipe is fitted
on the cappuccino frother.
TRinse or replace the air intake pipe. You
will find a replacement in the Welcome
Pack.
Coffee only comes out
in drips when it is
being prepared.
Coffee or ground coffee has
been ground too finely and
is blocking the system. The
same filter cartridge may
have been used several
times or the water hardness
set incorrectly in the
programming mode.
T Put the grinder on a coarser setting or
use coarser ground coffee(see Chapter 1
‘Preparing and using for the first time –
Adjusting the grinder’).
TPerform descaling(see Chapter 5
‘Maintenance – Descaling the machine’).
Water hardness cannot
be adjusted.
The CLARIS Pro Blue filter
cartridge is activated.
T Deactivate the filter cartridge in
programming mode.
‘Fill bean container’ is
displayed although the
bean container is full.
The sliding catch for the
bean container has not
been pulled out or has not
been pulled out completely.
TPull the sliding catch on the right-hand
side of the bean container fully out.
‘Empty drip tray’ is
always displayed.
The metal contacts of the
drip tray are dirty or wet.
T Clean and dry the metal contacts on
the back of the drip tray.
‘Fill water tank’ is
displayed although the
water tank is full.
The water tank float is
trapped.
TDescale the water tank(see Chapter 5
‘Maintenance – Descaling the water
tank’).
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura IMPRESSA XJ9 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA XJ9 Professional in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA XJ9 Professional

Jura IMPRESSA XJ9 Professional Additional guide - English - 1 pages

Jura IMPRESSA XJ9 Professional Additional guide - German - 1 pages

Jura IMPRESSA XJ9 Professional User Manual - German - 56 pages

Jura IMPRESSA XJ9 Professional Additional guide - Dutch - 1 pages

Jura IMPRESSA XJ9 Professional User Manual - Dutch - 56 pages

Jura IMPRESSA XJ9 Professional Additional guide - French - 2 pages

Jura IMPRESSA XJ9 Professional User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info