28
4 Permanent settings in programming mode
In this programme item you can set the language used by your
IMPRESSA.
Example: Proceed as follows to change the language from
ENGLISH to DEUTSCH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item
LANGUAGE is displayed.
k T Press the Rotary Switch.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is displayed.
k T Press the Rotary Switch.
OK appears briefly on the display.
SPRACHE
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
BEREIT
In the programme item LOCK you can make the following settings.
U
BUTTONS:
U
Each product can be disabled individually. It cannot then be
prepared.
LOCKED is briefly displayed if the button for a
disabled product is pressed.
U
PRE-SELECT:
U
One-off settings cannot be made before and during prepa-
ration. The product is prepared according to the settings in
programming mode.
U
MAINTAIN:
U
The maintenance programmes are disabled and cannot be
started.
Example:Proceed as follows to disable one-off settings before and
during preparation.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item LOCK is
displayed.
Language
Disable
