25
4 Permanent settings in programming mode
k T Press and hold the Rotary Switch until RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item RESET
is displayed.
k T Press the Rotary Switch.
PRODUCT
k T Press the Rotary Switch.
SELECT BUTTON
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
i T Press the 1 espresso button
OK appears briefly on the display. The values for 1 espresso
are reset to the factory settings.
SELECT BUTTON
k T Press the Rotary Switch to exit the programme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
RESET
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item INFO you can view the following informa-
tion.
U
BUTTONS: Number of prepared speciality coffees, hot water
and steam
U
CLEAN, DE-SCALE, FILTER: number of maintenance
programmes performed and the current maintenance status.
U
VERSION: Software version
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
RINSE
g T Turn the Rotary Switch until the programme item INFO is
displayed.
k T Press the Rotary Switch.
BUTTONS
Querying information