8
Please only use fresh, cold water. Never fill up with milk,
mineral water and other fluids. You can also top up water with-
out removing the tank. Simply remove the cover and pour in
the water from above with a vessel and replace the lid again.
3.4 Adding coffee beans
You have the possilility of using two different types of coffee beans.
Ⅲ Remove the cover from the bean container (Fig. 3)
Ⅲ Clean out any dirt or foreign objects from the bean container.
Ⅲ Fill coffee beans into the bean container and replace the cover
again.
4. First use
Make sure to have filled the water tank and the bean tank.
Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear of
the machine (Fig. 15/D).
Ⅲ Open the programming door on the front (Fig. 4) and switch the
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).
LANGUAGE
ENGLISH
Ⅲ Select a language of your choice by pressing the ‘+’ or ‘–’ key
(Fig. 5/F or L).
Ⅲ Press P to save your selection (Fig. 5/E).
CONFIRMED
TIME
HOURS
—: —
Ⅲ Set the hours by pressing the ‘+’ or ‘–’ key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).
TIME
MINUTES
12:00
Ⅲ Set the minutes by pressing the ‘+’ or ‘–’ key (Fig. 5/F or L).
Ⅲ Press P to save your setting (Fig. 5/E).
CONFIRMED
WEEKDAY
MONDAY
Ⅲ Press ‘+’ or ‘–’ (Fig. 5/F or L) to set the weekday.
Ⅲ To save, press P (Fig. 5/E).
WELCOME TO
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
SYSTEM FILLI
MACHINE HEATING UP
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and then
move on to the two milk spouts.
5. Switching the machine on
Ⅲ Switch the IMPRESSA X9 on with the power switch on the rear of
the machine (Fig. 15/D).
Ⅲ Open the programming door on the front (Fig. 4) and switch the
IMPRESSA X9 on with the ON / OFF key (Fig. 5/A).
WELCOME TO
MACHINE HEATING UP
Ⅲ Place a cup under the height-adjustable dual spout (Fig. 6).
PRESS RINSE
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and then
move on to the two milk spouts.
6. Rinsing the machine
COFFEE READY
Ⅲ Press the Rinse key (Fig. 5/G).
RINSING
When rinsing the machine, start with the coffee spout and then
move on to the two milk spouts.
7. Setting the grinding degree
You can adjust the grinding gear to the roast of your coffee. We rec-
ommend
a finer setting Ǟ (for a lighter roast)
a coarser setting Ǟ (for a darker roast)
Ⅲ To adjust the grinding degree, turn the setting rings to the required
position (Fig. 7).
Ⅲ You have the following options:
The smaller the dots, the finer the grind
The larger the dots, the coarser the grind
The grinding degree may only be adjusted while the grinding
gear is running.
