2495

Jura Impressa X70 Manual

12
Zoom out
Zoom in
Previous page
1/22
Next page
12
When steam is first drawn off, there is a possibility of spat-
tering. The pivoting nozzle becomes hot. Avoid direct
contact with the skin.
11. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under the
coffee-spout (15) and press ON/OFF key . When the rinsing
water has run into the container, the machine powers down.
Discard the water.
12. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
̈ Powder quantity
̈ Brewing temperature
̈ Water quantity
̈ Filter
̈ Water hardness
̈ Economy mode
̈ Timer clock
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
12.1 Programming POWDER QUANTITY
Ⅲ Switch the machine on by pressing ON/OFF key .
Ⅲ Press key until you can hear an acoustic signal.
P
Ⅲ POWDER QUANTITY / SELECT KEY
Ⅲ Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
Ⅲ POWDER
–
··········II··········
+
Ⅲ The powder quantity can be selected by pressing keys or
briefly.
Ⅲ To store the new powder quantity in memory briefly press
key .
Ⅲ POWDER QUANTITY / SELECT KEY.
Ⅲ You can go to the next setting by pressing key .
12.2 Programming coffee temperature
Ⅲ TEMPERATURE COFFEE / SELECT KEY
Ⅲ Now press the key that you want to programme.
Ⅲ Select the required temperature (high or normal) by activating
key or .
Ⅲ To store the new coffee temperature in memory briefly press
key .
Ⅲ TEMPERATURE COFFEE / SELECT KEY
Ⅲ You can call up the next setting by pressing key .
12.3 Programming water quantity
Ⅲ WATER QUANTITY / SELECT KEY
Ⅲ Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
Ⅲ The selected value is confirmed
Ⅲ Now your machine prepares a coffee.
Ⅲ ENOUGH COFFEE / PRESS KEY
Ⅲ OK?
–
··········II··········
+
P
P
+
P
-
+
+
P
-
+
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura Impressa X70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura Impressa X70 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura Impressa X70

Jura Impressa X70 User Manual - German - 22 pages

Jura Impressa X70 User Manual - Dutch - 22 pages

Jura Impressa X70 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info