19
14.3 Milk setting
The system’s basic settings include a pre-defined amount of milk
(20 sec.). However, this amount can be modified as required.
Ⅲ COFFEE READY
Ⅲ
Ⅲ Place a cup under the cappuccino nozzle (4).
Ⅲ Press the Milk key and hold it down until the following mes-
sage appears:
Ⅲ MILK
Ⅲ 20 SEC (example)
Ⅲ The milk will be dispensed. Keep on holding the key down
until the following message is displayed:
Ⅲ ENOUGH MILK
Ⅲ PRESS BUTTON
Ⅲ When the machine has dispensed as much milk as you wanted,
briefly press the key once more.
Ⅲ CONFIRMED
Ⅲ √
Ⅲ The amount of milk to be used is now programmed.
You can also set the amount of milk in the programming
mode (see Chapter 15.7)
14.4 Setting the amount of hot water
The system’s basic settings include a pre-defined amount of water
(225 ml). However, this amount can be modified as required.
Ⅲ COFFEE READY
Ⅲ
Ⅲ Place a cup under the hot water spout (12).
Ⅲ Press the Hot Water key and hold it down until the following
message appears:
Ⅲ HOT WATER
Ⅲ PORTION
Ⅲ Machine dispenses hot water. Keep on holding the key down
until the following message is displayed:
Ⅲ ENOUGH WATER
Ⅲ PRESS BUTTON
Ⅲ When the machine has dispensed as much hot water as you
wanted, briefly press the key once more.
Ⅲ CONFIRMED
Ⅲ √
Ⅲ The amount of water to be dispensed is now programmed.
15. Programming
The IMPRESSA leaves the factory with a number of default
settings that allow you to make coffee without having to pro-
gram the machine first. You can, however, adjust various
parameters to make the coffee suit your personal taste.
The following parameters can be programmed:
ț Filter
ț Water hardness
ț Maintenance
ț Temperature
ț Coffee strength
ț Cappuccino
ț Milk
ț Save energy
ț Time
ț Automatic switch-on time
ț Automatic switch-off time
E
