468070

Jura IMPRESSA S90 Manual

15
Zoom out
Zoom in
Previous page
1/22
Next page
15
Ⅲ Then press key briefly to store the water hardness level in
memory.
Ⅲ By pressing the button, you can select the next phase, or
press the button in order to leave the programming.
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness“.
13.8 Programming economy mode
Ⅲ ECONOMY MODE OFF
Ⅲ Press key
Ⅲ By briefly pressing key or you can programme the mode
you would like.
Ⅲ Then press key briefly to store mode in memory
Ⅲ By pressing the button, you can select the next phase, or
press the button in order to leave the programming.
You can programme your machine to “economy mode“. In the set-
ting ECONOMY MODE ON the steam heating-system is switched
off. The heating for the cup warming tray is switched off too. If
you want to draw off steam you need to press the steam key ,
warning lamps flash and your machine heats up.
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
ECONOMY MODE OFF means that the stand-by-status for steam
is set to 20 minutes and the heating for the cup warming tray is on.
After 10 minutes the warning lamp goes out. By pressing the steam
key anew, the machine returns to stand-by-status for drawing off
steam.
N
+
P
-
+
P
N
+
P
13.9 Programming timer clock
A programming of the timer clock is necessary if an auto-
matic switch on time is required.
Ⅲ TIME —.—
Ⅲ Press key .
Ⅲ By briefly pressing key or you can set the hours and then
confirm by pressing key .
Ⅲ By briefly pressing key or you can set the minutes and
then confirm by pressing key .
Ⅲ By pressing the button, you can select the next phase, or
press the button in order to leave the programming.
13.10 Programming automatic switch on time
A programming of the timer clock is necessary if an automatic
switch on is needed.
Ⅲ UNIT ON —.—
Ⅲ Press key .
Ⅲ By briefly pressing key or you can set the hours and then
confirm by pressing key .
Ⅲ By briefly pressing key or you can set the minutes and
then confirm by pressing key .
Ⅲ By pressing the button, you can select the next phase, or
press the button in order to leave the programming.
To switch off the automatic timer proceed as follows:
Press key
Press key
UNIT ON —:—
N
P
N
+
P
-
+
P
-
+
P
N
+
P
-
+
P
-
+
P
E
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura IMPRESSA S90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA S90 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA S90

Jura IMPRESSA S90 User Manual - German - 23 pages

Jura IMPRESSA S90 User Manual - Dutch - 24 pages

Jura IMPRESSA S90 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info