468064

Jura IMPRESSA S9 Manual

9
Zoom out
Zoom in
Previous page
1/22
Next page
9
Ⅲ Place a container under the coffee-spout (15) and press rinsing
key .
Ⅲ UNIT RINSING
Ⅲ COFFEE READY
4.2 Cup illumination
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
When you switch on the machine or press any key, the cup illumi-
nation is activated for 3 minutes. To switch on the cup illuminati-
on, with the machine switched off, press any key.
5. Rinsing the machine
Ⅲ RINSE UNIT
Ⅲ Place an empty cup under the coffee-spout (15).
Ⅲ Press rinsing key .
If the machine has been switched off and has already cooled
down it will be necessary to carry out this rinsing function
when the machine is switched on again.
After switching off the machine, the rinsing sets off automa-
tically.
6. Adjusting for water hardness
The water is heated inside the machine. With use, this leads to
calcium deposits (furring) forming on the machine. This will be
automatically indicated on the display.
For this reason, it is necessary to adjust the machine to the
hardness of your local water before you use it for the first time.
Use the enclosed test-sticks for this purpose.
1° water hardness on the German scale represents 1.79° on
the French scale.
The machine has got 5 hardness settings to choose from. While
adjusting, the chosen grade is shown on the display.
The symbols on the display mean:
HARDNESS
LEVEL—: water hardness function is switched off
HARDNESS German water hardness 1 – 7°
LEVEL 1: French water hardness 1.79 – 12.53°
HARDNESS German water hardness 8 – 15°
LEVEL 2: French water hardness 14.32 – 26.85°
HARDNESS German water hardness 16 – 23°
LEVEL 3: French water hardness 28.64 – 41.14°
HARDNESS German water hardness 24 – 30°
LEVEL 4: French water hardness 42.96 – 53.7°
The machine is adjusted to hardness level 3 before it leaves the
factory. You can alter this setting by following the instructions
below:
Ⅲ Switch the machine on by pressing ON/OFF key . The
machine adjusts fully-automatically to the starting position.
Ⅲ PLEASE WAIT
Ⅲ Open cover (3) and press key , until you hear an acoustic sig-
nal.
Ⅲ PRESS KEY / POWDER QUANTITY
Ⅲ Press key several times until the following message appears:
Ⅲ HARDNESS LEVEL 3
Ⅲ By pressing key you can hear an acoustic signal, the set
hardness level flashes.
Ⅲ You can alter the hardness level by pressing key or . After
setting, press key once again to confirm. An acoustic signal
can be heard.
Ⅲ Press key to return to stand-by-status.
N
P
+
-
P
+
P
E
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura IMPRESSA S9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA S9 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA S9

Jura IMPRESSA S9 User Manual - German - 23 pages

Jura IMPRESSA S9 User Manual - Dutch - 24 pages

Jura IMPRESSA S9 User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info