23
Ⅲ SYSTEM
EMPTYING
Ⅲ When the process has been completed, the IMPRESSA switches
itself off.
The display will read “FILL SYSTEM / PRESS STEAM” next
time you switch the machine on. For more information, please refer
to Chapter 3 “First use”.
13.11 General cleaning instructions
Ⅲ Never use sharp objects or caustic chemicals for cleaning.
Ⅲ Clean the case using a soft, damp cloth.
Ⅲ Clean the pivoting steam spout (23) after each use.
Ⅲ After heating milk, draw off some hot water to clean the inside
of the pivoting steam spout (23).
Ⅲ Remove the Professional Cappuccino Frother to clean it
thoroughly.
Ⅲ The water tank should be rinsed out and filled with fresh water
daily.
Visible calcification in the water tank can be removed using
a commercial decalcifying agent. To do so, remove the water
tank from the machine.
If you are using a CLARIS plus filter cartridge, remove it
from the tank first.
14. Cleaning
The IMPRESSA features an integrated cleaning program. The
process takes approx.15 minutes.
Please only use original JURA cleaning tablets: their formula
is especially tailored to JURA coffee machines. Please note
that the use of unsuitable cleaning agents may cause damage
to your machine and could leave unfavourable residues in the
water.
Once started, the cleaning process must not be interrupted.
After each cleaning process, the filler funnel for the pre-
ground coffee (17) should be cleaned as well.
Ⅲ SELECT PRODUCT
CLEAN MACHINE
Ⅲ Press Rinse until the following message appears:
Ⅲ EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and integrated coffee grounds bin.
Ⅲ TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and integrated coffee
grounds bin back into the IMPRESSA.
Ⅲ PRESS
RINSE
Ⅲ Place a sufficiently large receptacle (ca. 0.5 litres) under the
coffee spout (18).
Ⅲ Press Rinse .
Ⅲ MACHINE
CLEANING
E
