31
4 Permanent settings in programming mode
U
CAPP RINSE AFTER10'
U
You are prompted to perform a cappuccino rinse 10 minutes
after preparation of a milk product.
U
CAPP RINSE NOW
U
You are prompted to perform a cappuccino rinse immedi-
ately after preparation of a milk product.
Example: Proceed as follows to make the machine prompt you to
perform the cappuccino rinse immediately after preparing a milk
product.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
RINSES is displayed.
k T Press the Rotary Switch to enter the programme item.
INIT RINSE MANUAL
g T Turn the Rotary Switch until CAPP RINSE AFTER10'
is displayed.
k T Press the Rotary Switch to enter the programme item.
CAPP RINSE AFTER10'
g T Turn the Rotary Switch until CAPP RINSE NOW is dis-
played.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
CAPP RINSE NOW
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch.
RINSES
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
In the programme item RESET you can reset various settings to
their factory settings:
U
PRODUCT
U
The settings (amount of water, aroma, temperature etc.) for
any product can be reset individually to the factory settings.
The corresponding double product is reset to the factory
settings at the same time.
Restore factory settings
