28
4 Permanent settings in programming mode
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk for
a latte macchiato from
16 SEC to 20 SEC, the amount of
water from
45ML to 40ML and the interval from 30SEC to
20SEC.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
SELECT PRODUCT
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To change the setting for a double product, press the corre-
sponding button twice within two seconds.
q T Press the Latte Macchiato button.
COFFEE 45ML
k T Press the Rotary Switch to enter the programme item.
COFFEE 45ML
g T Turn the Rotary Switch until COFFEE 40ML is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
COFFEE 40ML
g T Turn the Rotary Switch until MILK 16SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
MILK 16SEC
T Turn the Rotary Switch until MILK 20SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
MILK 20SEC
g T Turn the Rotary Switch until PAUSE 30 SEC is dis-
played.
k T Press the Rotary Switch to enter the programme item.
PAUSE 30SEC
g T Turn the Rotary Switch until PAUSE 20 SEC is dis-
played.