37
5 Permanent settings in programming mode
A L Press the 1 Espresso button.
WATER
Ä L Turn the Rotary Switch until TEMP. appears.
M l Press the Rotary Switch to enter the programme item.
NORMAL
Ä L Turn the Rotary Switch until HIGH appears.
M l Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
TEMP.
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programme item.
BUTTONS
Ä L Turn the Rotary Switch until EXIT appears.
M l Press the Rotary Switch to exit the programming mode.
READY
An energy saving mode (Energy Save Mode, E.S.M.
©
) permanent
setting can be made under this programme item.
Your IMPRESSA has two energy-saving modes:
p ENERGY -
u Your IMPRESSA is continuously ready for use.
u All coffee and milk products, as well as hot water, can be pre-
pared without having to wait.
p ENERGY √
u After approx. 5 minutes, your IMPRESSA switches to the
energy-saving temperature and is not ready for use.
u Before coffee, hot water or milk is prepared, the machine
heats up for approx. 30 seconds.
o ENERGY - is defined under the basic settings.
Example: To change the energy-saving level from
ENERGY - to
ENERGY √, proceed as follows:
Precondition:
READY appears on the display.
M l Keep the Rotary Switch pressed until RINSE appears.
Ä L Turn the Rotary Switch until ENERGY - appears.
Energy Save Mode
