26
3 Familiarising yourself with the control options
Ä l Turn the Rotary Switch until 110 ML is displayed.
The set amount of water flows into the cup. The preparation
stops automatically.
READY appears on the display.
It is easy to make permanent settings for the amount of water for all
coffee specialities, the hot water and steam according to cup size. As
in the following example, adjust the amount of water once. Every
time you prepare a drink in the future, this amount of water will be
dispensed.
Permanent settings according to cup size works the same way for all
coffee specialities.
Example: To make permanent settings for the amount of water for
an Espresso, proceed as follows:
Precondition:
READY appears on the display.
l Place an Espresso cup under the coffee spout.
a l Press and hold the 1 Espresso button.
1 ESPRESSO appears on the display.
a l Hold the 1 Espresso button down until
ENOUGH COFFEE ? appears.
a l Release the 1 Espresso button.
Coffee preparation will start and the Espresso will flow into
the cup.
l Press any button as soon as enough Espresso has flowed
into the cup.
Espresso preparation will now stop.
OK appears briefly on
the display. The set amount of water for an Espresso will be
permanently stored.
o You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. Simply by turning and pressing the Rotary Switch,
you can navigate through the easy-to-understand program steps
and make permanent settings.
Permanent settings
according to cup size
Permanent settings in
programming mode
