12
Ⅲ Press (/ / )to select the strength of your espresso.
Ⅲ ESPRESSO STRONG
Ⅲ Press symbol .
Ⅲ ESPRESSO STRONG. Your product is being pre-
pared.
Ⅲ PLEASE SELECT
8.2 Drawing off a large cup of coffee
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press
symbol .
Ⅲ LARGE CUP NORMAL
Ⅲ Press (/ / )to select the strength of your coffee.
Ⅲ LARGE CUP MILD
Ⅲ Press symbol .
Ⅲ LARGE CUP MILD Your product is being prepared.
Ⅲ PLEASE SELECT
8.3 Drawing off pre-ground coffee
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
If you press the draw-off key unintentionally, you can stop
the operation by pressing the maintenance key. Your coffee
machine will carry out a rinsing operation.
Ⅲ Use the key to switch on the coffee machine.
Ⅲ WWW. IMPRESSA-F-LINE.COM
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press selection key .
Ⅲ FILL IN POWDER / PLEASE SELECT
Ⅲ Now fill in 1 or 2 level dosing spoonfuls of pre-ground coffee in
the filler funnel for pre-ground coffee (Fig. 5).
Ⅲ Place 1 cup under the adjustable coffee spout (16) and press the
corresponding symbol ( / / ).
Ⅲ LARGE CUP POWDER
Ⅲ Press symbol .
Ⅲ LARGE CUP POWDER Your powder coffee is be-
ing prepared.
Ⅲ PLEASE SELECT
9. Drawing off hot water
You can adjust the water portion individually (see Chapter
12 Programming). Install the hot water jet (Fig. 7) to obtain
perfect water flow.
At the start of the water draw-off there can be splashing
Avoid direct contact with the skin!
Do not replace the replaceable hot water jet directly after
drawing off water, because the jet is hot after the draw-off
operation.