468201

Jura IMPRESSA F90 Manual

9
Zoom out
Zoom in
Previous page
1/26
Next page
9
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ FILL SYSTEM / WATER PORTION
Ⅲ Place a receptacle under the Professional Cappuccino Frother
(14) (Fig. 14).
Ⅲ Press water portion draw-off key
Ⅲ SYSTEM FILLING
Ⅲ MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press symbol .
Ⅲ COFFEE NORMAL
If FILL BEANS is displayed, touch the symbol
again. The mill was still empty.
To get an excellent crema, adjust the coffee spout (16) to the
size of your cup (Fig. 3 ).
4.1 Cup illumination
The cup illumination puts your coffee in a good light, making it a
treat for the eyes.
When you plug in or switch on the machine or press any key, the
cup illumination is activated for 1 minute. To switch on the cup
illumination, with the machine switched off, press any key (Fig. 10).
5. Adjustment of water hardness
In the coffee machine water is heated up. As a result, calcifi-
cation occurs during normal use and is indicated auto-
matically. Before using the machine for the first time the
hardness of the water used must be adjusted. Use the sup-
plied test sticks for this.
1° German hardness is equivalent to 1.79° French hardness.
The coffee machine has 5 hardness degrees which can be used and
are displayed while you are adjusting the water hardness.
The displayed information means the following:
WATER
HARDNESS –– Water hardness function switched off
WATER German water hardness degree 1 to 7°
HARDNESS 1 French Water hardness degree 1.79 – 12.53°
WATER German water hardness degree 8 to 15°
HARDNESS 2 French Water hardness degree 14.32 – 26.85°
WATER German water hardness degree 16 to 23°
HARDNESS 3 French Water hardness degree 28.64 – 41.14°
WATER German water hardness degree 24 to 30°
HARDNESS 4 French Water hardness degree 42.96 – 53.7°
When the machine leaves the factory it is adjusted to WATER
HARDNESS 3. You can adjust another hardness. To do this,
proceed as follows:
Pull out the mains cable from the cable box on the rear side of the
coffee machine and connect the machine to mains supply.
Ⅲ Press the key to switch on the coffee machine.
Ⅲ WWW.IMPRESSA-F-LINE.COM
Ⅲ Your coffee machine is switched to start-up position.
Ⅲ HELLO, MACHINE HEATING UP
Ⅲ PRESS MAINTENANCE
Ⅲ MACHINE RINSING
Ⅲ PLEASE SELECT
Ⅲ Press programming key until you hear an acoustic signal.
Ⅲ FILTER NO
E
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura IMPRESSA F90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura IMPRESSA F90 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura IMPRESSA F90

Jura IMPRESSA F90 User Manual - German - 27 pages

Jura IMPRESSA F90 User Manual - Dutch - 27 pages

Jura IMPRESSA F90 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info