21
䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲 The illuminated ring (2) is active.
䡲 Press the Rotary Switch (1) until you reach the OFF AFTER pro-
gramme item.
䡲 OFF AFTER
䡲 Press the Rotary Switch (1) to enter the OFF AFTER programme
item.
䡲 1 HRS
䡲 Turn the Rotary Switch (1) to set the number of hours after which
the machine is to switch off.
䡲 For example 2 HRS.
䡲 Press the Rotary Switch (1) to save the new automatic switch-off
time.
䡲 OK
䡲 OFF AFTER
䡲 Turn the Rotary Switch (1) until the following message appears on
the display.
䡲 EXIT
䡲 Press the Rotary Switch (1) again to exit programming mode.
䡲 READY
15.6 Rinse programme item
You can set whether the rinse should be started manually or
automatically when switching on.
䡲 READY
䡲 Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
䡲 The illuminated ring (2) is active.
䡲 Turn the Rotary Switch (1) until RINSING appears on the display.
䡲 Press the Rotary Switch (1).
䡲 MANUAL
䡲 Turn the Rotary Switch (1) until the following message appears on
the display:
䡲 AUTOMATIC
䡲 Press the Rotary Switch (1) again to confirm the change.
䡲 OK
䡲 RINSING
䡲 Turn the Rotary Switch (1) until EXIT appears on the display.
䡲 Press the Rotary Switch (1) to exit programming mode.
䡲 READY
15.7 Reset programme item
In the RESET programme item you can reset various settings to
their factory settings:
䡲 PRODUCT
The settings (amount of water, strength, temperature) for any
product can be reset individually to the factory settings. The cor -
responding double product is reset to the factory settings at the
same time.
䡲 ALL PROD.
The settings (amount of water, strength, temperature) for all prod-
ucts are reset to the factory settings.
E
