18
Rotary Switch
Permanent settings in programming mode always follow the
same model. To enter programming mode, press the Rotary
Switch (1) until RINSE appears on the display. By turning the
Rotary Switch (1) you can change the set values and select dif-
ferent programme items. By pressing the Rotary Switch (1) you
can view values or save selected values.
You can select and adapt the following programme items to your
needs:
Programme
item Sub-item Explanation
RINSE RINSE
FILTER (only
appears if filter is
activated)
CLEAN
DE-SCALE (only
appears if filter is
not activated)
EXIT
BUTTONS SELECT
BUTTON
EXIT
FILTER –/⻫ NO –
YES ⻫
HARDNESS INACTIVE
(only 1° – 30° dH
appears if
filter is not
activated)
ENERGY –/⻫ SAVE –
SAVE ⻫
Programme
item Sub-item Explanation
OFF AFTER 15 MIN to 15 HRS
RINSING MANUAL
AUTOMATIC
RESET PRODUCT
ALL PROD.
RESET ALL
EXIT
INFO BUTTONS
CLEAN
FILTER (only
appears if filter is
activated)
DE-SCALE (only
appears if filter is
not activated)
VERSION
EXIT
DISPLAY ML
OZ
LANGUAGE DEUTSCH
ENGLISH
FRANCAIS
ITALIANO
NL
ESPANOL
PORTUGUES
РУССКИЙ
Select the desired maintenance pro-
gramme. If no action is taken, pro-
gramming mode is exited automati-
cally after approximately five sec-
onds. For more information, please
refer to chapters 6 and 16 to 18.
Select your settings for speciality
coffees, milk specialities and hot
water.
Indicate whether you want to operate
your IMPRESSA with or without a
CLARIS filter cartridge.
Adjust the water hardness.
Select an energy-saving mode.
Set the number of hours after which
the IMPRESSA should switch off auto-
matically.
Set whether the switch-on rinse
should be started manually or auto-
matically.
Reset the settings for individual
products, all products or the entire
machine to the factory setting.
Keep track of all prepared speciality
coffees and milk specialities and view
the maintenance status.
Select the unit for the amount of
water.
Select your language.
