21
Ⅲ Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
Ⅲ The illuminated ring (2) is active.
Ⅲ Press the Rotary Switch (1) until you reach the OFF AFTER pro-
gramme item.
Ⅲ OFF AFTER
Ⅲ Press the Rotary Switch (1) to enter the OFF AFTER programme
item.
Ⅲ 1 HRS
Ⅲ Turn the Rotary Switch (1) to set the number of hours after which
the machine is to switch off.
Ⅲ For example 2 HRS.
Ⅲ Press the Rotary Switch (1) to save the new automatic switch-off
time.
Ⅲ OK
Ⅲ OFF AFTER
Ⅲ Turn the Rotary Switch (1) until the following message appears on
the display.
Ⅲ EXIT
Ⅲ Press the Rotary Switch (1) again to exit programming mode.
Ⅲ READY
15.6 Rinse programme item
You can set whether the rinse should be started manually or
automatically when switching on.
Ⅲ READY
Ⅲ Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until RINSING appears on the display.
Ⅲ Press the Rotary Switch (1).
Ⅲ MANUAL
Ⅲ Turn the Rotary Switch (1) until the following message appears on
the display:
Ⅲ AUTOMATIC
Ⅲ Press the Rotary Switch (1) again to confirm the change.
Ⅲ OK
Ⅲ RINSING
Ⅲ Turn the Rotary Switch (1) until EXIT appears on the display.
Ⅲ Press the Rotary Switch (1) to exit programming mode.
Ⅲ READY
15.7 Reset programme item
In the RESET programme item you can reset various settings to
their factory settings:
Ⅲ PRODUCT
The settings (amount of water, strength, temperature) for any
product can be reset individually to the factory settings. The cor -
responding double product is reset to the factory settings at the
same time.
Ⅲ ALL PROD.
The settings (amount of water, strength, temperature) for all prod-
ucts are reset to the factory settings.
E
