17
Ⅲ ML
Ⅲ Turn the Rotary Switch (1) until the message OZ is displayed.
Ⅲ To confirm the new setting, press the Rotary Switch (1)
Ⅲ OZ
Ⅲ Press the programming key (3) to quit the programming
mode or select the next programming item using the Rotary
Switch (1)
Ⅲ READY
15.8 Switch-off rinsing operation
The switch-off rinsing operation of your IMPRESSA E80/85 is
activated when the machine leaves the factory. In special cases it
can be deactivated. For more information, contact your local
customer service.
16. Maintenance
16.1 Filling in water
Ⅲ FILL
WATER
If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 2.3.
Ⅲ READY
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water with gas or other liquids.
16.2 Emptying the coffee grounds container
Ⅲ EMPTY
GROUNDS
If this message appears on the display, you can no longer
draw off coffee. You must empty the coffee grounds con-
tainer first (Fig. 14).
Ⅲ Carefully take out the drip tray (21), it is filled with water.
Ⅲ DRAWER
MISSING
Ⅲ Insert the empty and clean trip tray again.
Ⅲ READY
16.3 Drawer missing
Ⅲ DRAWER
MISSING
Ⅲ If this information is displayed, the drip tray (21) is not installed
properly or was not installed at all.
Ⅲ Insert the drip tray (21).
Ⅲ READY
16.4 Fill coffee beans
Ⅲ FILL
BEANS
Ⅲ Refill beans as described in Chapter 2.4.
The message FILL BEANS will disappear after you draw off
your next cup of coffee.
We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before cleaning the tank,
switch off the IMPRESSA E80/85.
E