14
13.7 General cleaning instructions
Ⅲ Never use abrasive articles or corrosive chemicals to clean your
machine
Ⅲ Wipe off the inside and outside of the casing with a soft, damp
cloth.
Ⅲ Clean the pivoting nozzle after each use.
Ⅲ After heating milk, draw off a little hot water, in order to clean
the inside of the pivoting nozzle.
Ⅲ You can take off the frothing nozzle for a thorough cleaning.
Ⅲ The water tank should be rinsed and filled with fresh water
every day.
If you see any visible scaling in the water tank, you can
remove it with a customary de-scaling agent. Remove the
tank from the machine for this purpose.
If a Claris filter cartridge is used, it must be removed first.
13.8 Emptying the system
This process is necessary in order to protect the machine
against damage from frost in transportation.
Ⅲ Switch your machine off with the ON/OFF switch.
Ⅲ Place a sufficiently sized container under the pivoting nozzle for
hot water/steam (18).
Ⅲ Turn the selector key for coffee or hot water/steam (17) to
position .
Ⅲ Switch your machine on with the ON/OFF switch. The
symbol flashes and the symbol lights up.
Ⅲ Press the selector key until only the symbol flashes. After
a short time, steam comes out.
Ⅲ The drawing-off of steam stops automatically. Turn the selector
key for coffee or hot water/steam (17) back to position .
14. Cleaning
The machine has an integrated cleaning programme. The proce-
dure takes about 15 min.
If the machine needs cleaning, the symbol lights up. You
can continue to draw off coffee or hot water/steam and carry
out the cleaning programme at a later stage.
Please only use Jura cleaning tablets, which you can obtain
from your dealer.
Once the cleaning process has started, it must not be inter-
rupted.
Ⅲ Switch the machine on with the ON/OFF switch.
Ⅲ Open the cover for special functions (3) and press the key
for about 3 seconds. The symbol flashes, the symbols ,
, light up. If the symbol lights up, pour water into the
water tank.
Ⅲ Empty the drip tray (1) and the coffee grounds container (20)
and put them back in again.
Ⅲ Put a sufficiently large vessel under the height-adjustable coffee
spout (14).
Ⅲ Now put a Jura cleaning tablet into the pre-ground coffee pow-
der filling funnel (13) (Fig 8).
Ⅲ Press the key . The symbols and flash. The automatic
cleaning procedure now starts.
Ⅲ If the symbol lights up, empty the tray and press the key
once more. The cleaning process is continued.
Ⅲ When the cleaning process has been completed, the symbol
lights up. Now empty the drip tray (1) and the coffee grounds
container (20) and put them back in again.
