10
3.7 Adjustable automatic switch-off
You can alter the automatic switch-off of 3 hours set by Jura. The
machine offers you 4 settings for this:
1st setting
The symbol flashes. The automatic switch-off is not activated.
2nd setting
The symbol flashes and the symbol lights up. The auto-
matic switch-off is set to 1 hour.
3rd setting
The symbol flashes and the symbols
,,
light up. The
automatic switch-off is set to 3 hours.
4th setting
The symbol flashes and the symbols
,,,,
light
up. The automatic switch-off is set to 5 hours.
In order to adjust or to alter the automatic switch-off, please
proceed as follows:
Ⅲ Insert the mains socket.
Ⅲ However, do not switch the machine on.
Ⅲ Push the coffee key for about 3 sec.
Ⅲ In order to set the required setting, press the coffee key .
Ⅲ In order to store the setting, press the ON/OFF switch.
If you do not make any adjustment of the setting for more
than 60 seconds, the display goes off. The last stored figure
is retained.
4. First use of the machine
Ⅲ Switch your machine on with the ON/OFF switch. The sym-
bol flashes and the symbol lights up. The machine auto-
matically goes to the starting position.
Ⅲ Put an empty cup under the pivoting nozzle for hot water/steam
(18).
Ⅲ Turn the selector key coffee or hot water/steam (17) to position
. The machine now lets off water. The flow of water stops
automatically.
Ⅲ Turn the selector key coffee or hot water/steam (17) back to
position .
5. Use of CLARIS filter cartridges
If the Claris filter cartridges are used properly, your machine
need never be descaled. You will find more information
about the Claris filter cartridge in the brochure “Claris. Hard
on scale. Soft to the coffee machine”.
After drawing off 50 litres or after 2 months, the effect of the
filter is exhausted. No report appears on the display. Re-
place the filter cartridge as described under point 5.1.
When you use the Claris filter cartridge, the first thing you
must do is to switch off the descaling display (as described
under point 3.6) (setting 0).
5.1 Inserting / replacing filter
Ⅲ Pull up the cartridge mounting in the water tank. Pressing
slightly, place the filter cartridge into the water tank (Fig. 2).
Ⅲ Close the cartridge mounting until it engages audibly. On the
cartridge mounting, there is a special turntable for the setting of
the replacement date.
Ⅲ Fill the water tank with fresh, cold tap water and replace it.