611577
15
Zoom out
Zoom in
Previous page
1/29
Next page
45
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
E If milk has been prepared, you will be
prompted to clean the milk system
(
M-CLEAN / START ?). After 10 seconds
the switch-off process continues automati-
cally.
RINSING, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
4 Permanent settings in pro-
gramming mode
Products
You can make the following permanent settings:
U
Espresso
U
Amount of water: 15ML80ML
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Coffee
U
Amount of water: 25ML240ML
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Latte macchiato and cappuccino
U
Amount of milk foam: 3SEC120SEC
U
Interval: 0SEC60SEC
U
Coffee strength: 10 levels
U
Amount of water: 25ML240ML
U
Temperature: NORMAL, HIGH
U
Milk foam
U
Amount of milk foam: 3SEC120SEC
U
Hot water
U
Amount of water: 25ML450ML
Permanent settings in programming mode always
follow the same model.
Example:Permanently change the coffee strength
(
FLAVOUR) of an espresso.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
PRODUCT is
displayed.
T Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
< TPress the Espresso button.
ESPRESSO
WATER
T Turn the Rotary Switch until FLAVOUR is
displayed.
T Press the Rotary Switch to enter the
programme item.
nnnnnnkkkk (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is now set.
FLAVOUR
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura ENA Micro 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura ENA Micro 90 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura ENA Micro 90

Jura ENA Micro 90 User Manual - German - 30 pages

Jura ENA Micro 90 User Manual - Dutch - 30 pages

Jura ENA Micro 90 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info