468280

Jura ENA Micro 9 Manual

14
Zoom out
Zoom in
Previous page
1/28
Next page
42
4 Permanent settings in programming mode
Setting the water hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to adjust the water hardness.
The water hardness can be adjusted on a continu-
ous scale between 1° dH and 30° dH.
Example: Change the water hardness setting from
16°dH to 25°dH.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is set.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The energy-saving mode (Energy Save Mode,
E.S.M.
©
) helps you to prevent your machine from
consuming power unnecessarily and to actively
save energy:
U
ENERGYp
U
Soon after the last preparation, the ENA
stops heating up. After about 5 minutes the
message
ENERGY ON is displayed.
U
Before you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
U
ENERGY-
U
The ENA is constantly ready for use.
U
All speciality coffees as well as hot water can
be prepared without having to wait.
Example: Change the energy-saving mode from
ENERGYp to ENERGY-.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until
ENERGYp is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMYp
g T Turn the Rotary Switch until ECONOMY-
is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the energy-saving mode is set.
ENERGY-
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your ENA switches
off automatically after the preset time following
the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
Example: Change the switch-off time from
2HRS to 1HRS.
Precondition:
READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura ENA Micro 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura ENA Micro 9 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura ENA Micro 9

Jura ENA Micro 9 User Manual - German - 28 pages

Jura ENA Micro 9 User Manual - Dutch - 28 pages

Jura ENA Micro 9 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info