534474
13
Zoom out
Zoom in
Previous page
1/24
Next page
39
3 Daily operation
pt
es
nl
it
fr
ru
en
de
< TTouch the Espresso symbol to start
preparation.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
E Please note that changing the consistency of
grind only takes effect for the second coffee
preparation.
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
E Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
E It is not possible to prepare two cups with
ground coffee. If the coffee spout is in the
‘2 cups’ position, just one cup is prepared.
E Never add more than one level measuring
spoon of ground coffee.
E The desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
E If you did not add a sufficient amount of
ground coffee, the Y, <, > and v symbols
flash and the ENA stops the operation.
All speciality coffees with ground coffee are
prepared following this model.
Example:Prepare a cup of coffee using ground
coffee.
Precondition:Your ENA is ready for use.
T Place a cup under the coffee spout.
T Open the powder chute for ground coffee.
The Ground Coffee symbol v lights up.
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
The Y, <, > and v symbols flash.
The Y, < and > symbols light up.
>T Touch the Coffee symbol to start prepara-
tion.
The Coffee symbol > flashes, the preset
amount of water flows into the cup.
Preparation stops automatically. Your ENA is
once more ready for use.
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the machine is switched on, it is automati-
cally rinsed.
T Place a receptacle under the coffee spout.
Q TPress the On/Off button to switch the
machine on.
The Y, < and > symbols flash, the
machine heats up.
The machine is rinsed, water flows out of the
coffee spout. The rinse stops automatically.
Your ENA is ready for use.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura ENA Micro 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura ENA Micro 5 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura ENA Micro 5

Jura ENA Micro 5 User Manual - German - 26 pages

Jura ENA Micro 5 User Manual - Dutch - 26 pages

Jura ENA Micro 5 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info