467999
26
Zoom out
Zoom in
Previous page
1/34
Next page
26
ENA 5
T Place a receptacle (500 ml min.) under the
the Connector System
©
.
l T Turn the switch to position m.
DE-SCALING, water flows out of the
Connector System
©
several times.
CLOSE TAP
y T Turn the switch to position o.
DE-SCALING, the descaling operation
is continued.
EMPTY TRAY
T Empty the coffee grounds container and
drip tray and replace.
T Empty the receptacle and place it under the
Connector System
©
once more.
FILL WATER TANK
T Remove the water tank, rinse thoroughly,
fill with fresh, cold water and replace the
tank.
OPEN TAP
l T Turn the switch to position m.
DE-SCALING, water flows out of
the Connector System
©
several times.
The process is interrupted.
CLOSE TAP.
y T Turn the switch to position o.
DE-SCALING, the descaling operation
is continued.
EMPTY TRAY
T Empty the coffee grounds container and
drip tray and replace.
T Reattach the nozzle to the Connector
System
©
.
READY
Descaling the machine – manually
The ‘Descale machine’ operation can be manually
initiated.
Precondition:
READY appears on the display.
T Open the cover behind the Rotary Switch.
P T Press the P button until RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
RINSE
g T Turn the Rotary Switch until DE-SCALE
is displayed.
k T Press the Rotary Switch.
EMPTY TRAY
T Continue with the third prompt to take
action (indicated by
T), as described in the
section ‘Descaling the machine following
a prompt’.
Rinsing the Professional Cappuccino Frother
To ensure that the Professional Cappuccino
Frother works perfectly, you should rinse it with
water whenever you have prepared some milk.
E The ENA will not prompt you to rinse the
Professional Cappuccino Frother.
T Remove the milk pipe from the milk carton
or milk container.
T Fill a receptacle with fresh water and
immerse the milk pipe in the water.
T Place another receptacle under the nozzle.
T Set the selector lever of the nozzle to the
milk foam
p or milk t position.
g T Turn the Rotary Switch until STEAM is
displayed.
k T Press the Rotary Switch.
HEATING
READY appears as soon as the ENA is
sufficiently heated.
l T Turn the switch to position m.
STEAM, the nozzle and pipe are rinsed.
y T Turn the switch to position o as soon as
clean water flows into the receptacle.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jura ENA 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jura ENA 5 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Jura ENA 5

Jura ENA 5 User Manual - German - 32 pages

Jura ENA 5 User Manual - Dutch - 36 pages

Jura ENA 5 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info