36
5 Permanent settings in programming mode
o T Touch the Coffee symbol.
1 COFFEE is displayed for about two seconds.
WATER
k T Press the Rotary Switch to enter the programme item.
100 ML (example)
g T Turn the Rotary Switch until
120 ML is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
WATER
g T Turn the Rotary Switch until TEMP. is displayed.
k T Press the Rotary Switch to enter the programme item.
NORMAL
g T Turn the Rotary Switch until HIGH is displayed.
k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
TEMP.
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item ENERGY you can permanently set an
energy-saving mode (Energy Save Mode, E.S.M.
©
):
Z SAVE -
U All coffee products as well as hot water can be prepared
without having to wait.
U Before steam preparation, the machine heats up.
Z SAVE w
U Approximately five minutes after the last preparation the
IMPRESSA switches to the energy-saving temperature and is
not in stand-by mode. When the machine is at energy-
saving temperature, this is indicated on the display by the
message
ENERGY ON.
U Before the preparation of coffee, hot water or steam, the
machine heats up.
Energy-saving mode
