519527
11
Zoom out
Zoom in
Previous page
1/104
Next page
TW2
11
English
7 Error Localisation
Malfunction Cause Correction
Room temperature set-
ting is not reached
Thermostat valve(s) installed in the
room where the remote control
(with room temperature sensing) is
located
Have the thermostatic valve(s)
removed
or
Open the thermostatic valve com-
pletely
or
switch off the room temperature
sensing
Boiler thermostat on the heating
equipment is set too low
Increase the setting of the feed
temperature selector on the heating
equipment
The room temperature
setting is exceeded
Mounting location of the remote
control (with room temperature
sensing) is unsuitable, e.g. on an
outer wall, near a window, in a
draft, etc.
Select a more suitable mounting
location (see chapter on mounting)
or
switch off room temperature sens-
ing
Room temperature vari-
ations too large
Temporary influence of external
heat source on the remote control
(with room temperature sensing),
e. g. sun radiation, room lighting,
TV, fireplace, etc.
Select a more suitable mounting
location (see chapter on mounting)
or
switch off room temperature sens-
ing
Temperature increases
instead of decreasing
Time of day set incorrectly on the
timer
Check setting on the timer for the
outside-temperature controlled pro-
grammer
Switching riders incorrectly
inserted
Check setting on the timer for the
outside-temperature controlled pro-
grammer
Room temperature
too high in reduced
operation
High heat storage capacity of the
building
Select an earlier time for reduction
Minimum feed temperature set too
high
Check settings against operating
instructions for the outside-temper-
ature controlled programmer and
central heating appliance and cor-
rect as necessary.
Improper or no regula-
tion
Outside-temperature controlled
programmer or remote control unit
incorrectly wired
Check the wiring in accordance
with the associated mounting
instructions and correct if neces-
sary.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junkers TW 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junkers TW 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junkers TW 2

Junkers TW 2 User Manual - Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info