636490
34
Zoom out
Zoom in
Previous page
1/116
Next page
Product description
6 720 645 817 (2010/09)
34
4.1.4 Characteristics and special features
Advanced boiler concept
Heat exchanger made from high grade
aluminium-silicon sand casting
Compact design and low weight
Reduced pressure drop on the water side for
optimised and simple system technology
With quiet modulating gas premix burner
Low power consumption through variable speed fan
With digital boiler and burner control units
Suitable for new installations and modernisation
projects
Balanced flue
Balanced flue operation possible (accessories)
High standard seasonal efficiency [to DIN] and
economic viability
The optimised heating surfaces enable good heat
transfer with low flue gas losses and high condensing
output. This ensures high efficiency and good
economic viability. The result is standard seasonal
efficiency [to DIN] of up to 108 %.
4-star energy efficiency category to DIN-EN 483
Environmentally responsible
Low nitrogen oxide emissions (standard emissions
factor < 45 mg/kWh). This corresponds to the highest
emissions category to DIN-EN 483 – category 5.
Advanced burner technology
Modulating operation with digital combustion
management
Very easy conversion to other gas types with only a
few steps
Matching system equipment
Cascade solutions with up to eight boilers via a single
control system
Matching flue gas and ventilation air systems
Neutralising systems, accessories no. 1605 and
no. 1606, can be integrated inside the boiler,
consequently small installation space
Supplied fully wired ready for connection
Easy connection to the heating system because of
fully assembled delivery from factory plus matching
accessories
4.2 Gas burner
4.2.1 Burner and burner control unit
A highly premixing modulating gas premix burner with
clean combustion is used in the Suprapur gas
condensing boiler. The gas burner comprises a fan, gas
valve and, subject to boiler size, several burner rods.
Features
Emissions, NO
x
<45mg/kWh and CO<15mg/kWh
(standard emissions factors) comply with the highest
emissions category – category 5 to DIN-EN 483
Suitable for natural gas H and L
Easy conversion to other natural gas types possible
Modulation range:
KBR 120/160-3 A: 25 % - 100 %
KBR 200/240/280-3 A: 30 % - 100 %
MKB 240/320-3 A: 12,5 % - 100 %
MKB 400/480/560-3 A: 15 % - 100 %
Burner control unit
Burner control unit
Burner control and monitoring
Safety functions for boiler operation
Flue gas temperature monitoring
Setting parameters and issuing fault codes via the
control system
Display and calling up operating, service and fault
displays via the Service Diagnosis System (SDS)
0-10 V interface (DDC systems)
Connection possible via the ICM cascade module
Output and temperature-dependent boiler controls,
selectable via settings on the ICM
Changeover or conversion to LPG operation
is not possible.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junkers MKB 560-3 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junkers MKB 560-3 A in the language / languages: English as an attachment in your email.

The manual is 15,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info