636486
45
Zoom out
Zoom in
Previous page
1/116
Next page
Regulations and operating conditions
6 720 645 817 (2010/09)
45
6.6 Siting combustion equipment
Subject to the regulations of the relevant country, gas
combustion equipment with a total rated output in
excess of 50 kW may only be installed in rooms:
that are not used for any other purpose
that have no opening towards other rooms, except
doors
the doors of which are tight and self-closing or
that can be ventilated.
Notwithstanding these rules, combustion equipment
may also be installed in other rooms, if:
the use of these rooms makes this necessary and the
combustion equipment can be operated safely or
the rooms are in freestanding buildings that only
serve to operate the combustion equipment and fuel
storage.
Open flue combustion equipment must not be installed:
in stairwells, except in residential buildings with no
more than two apartments
in generally accessible hallways that serve as escape
routes or
in garages.
Rooms with systems that extract air
Open flue combustion equipment must only be installed
in rooms equipped with systems that extract air subject
to the following conditions:
simultaneous operation of the combustion equipment
and the air extractor systems will be prevented by
safety equipment
the flue gas routing will be monitored by appropriate
safety equipment or
flue gas will be routed via the air extractor systems or
it will be ensured that such systems cannot create
dangerous negative pressure.
6.7 Sound insulation
The quiet gas premix burner in the Suprapur generates
only low noise emissions, compared to conventional
pressure-jet gas burners. This generally makes
additional sound insulation measures to ensure airborne
noise inside the installation room superfluous. The
transmission of structure-borne noise is largely
prevented by the standard adjustable feet supplied.
Nevertheless, pumps and other system components can
cause structure-borne noise. Where required, this can
be addressed by the use of compensators and other
measures designed to reduce the transmission of
structure-borne noise. Further on-site measures can be
implemented if the aforementioned measures are
inadequate and more stringent requirements for noise
protection apply.
6.8 Antifreeze
The antifreeze Antifrogen N is approved for use in the
Suprapur series. Observe the manufacturer's
instructions.
When pumping liquids with viscosities that differ from
that of water, the hydraulic performance of pumps and
the pipework will also be different. For further details on
sizing pumps, see the technical guides published by the
pump manufacturers.
For further information on the siting and
installation of gas combustion equipment,
see country-specific regulations. These
must also be observed.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junkers MKB 400-3 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junkers MKB 400-3 A in the language / languages: English as an attachment in your email.

The manual is 15,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info