697418
8
Zoom out
Zoom in
Previous page
1/28
Next page
3.2 Leiding leggen 3.2 Pose de la tuyauterie
Leidingen aarden
De werkzaamheden moeten door een erkende installateur wor-
den uitgevoerd.
Mise à la terre des conduites
Les travaux doivent être réalisés par un installateur agréé.
f
Breng een aardklem aan op de aanvoer- en retourleiding
(willekeurige positie).
f
Placer une borne de mise à la terre sur les conduites de
départ et de retour (position au choix).
f
Aardklemmen via potentiaalvereffeningskabel NYM (mini-
maal 6 mm2) op de potentiaalvereffening van het gebouw
aansluiten.
f
Raccorder les bornes de mise à la terre par le câble de
liaison équipotentielle NYM (minimum 6 mm2) au rail d'équi-
librage de potentiel du bâtiment.
Leidingen leggen bij gebruik van een automatische
ontluchting op het dak (toebehoren)
Poser les tuyaux en cas d'utilisation d'un purgeur
automatique sur le toit (accessoire)
f
Leidingen stijgend naar de ontluchting leggen.
Bij iedere richtingsverandering naar beneden toe is een extra
ontluchting nodig (temperatuurbestendigheid 150°C).
f
Poser les tuyaux en pente vers le purgeur.
Pour chaque changement de direction vers le bas, un pot de
purge supplémentaire avec purgeur est nécessaire (résis-
tance thermique 150°C).
Fig. 5 Positie van de automatische ontluchter
1
automatische ontluchter (enkel te gebruiker wanneer de
installatie niet met de Junkers solar-vulpomp gevuld
wordt)
Fig. 5 Position du purgeur automatique
1
purgeur automatique (uniquement à utiliser quand
l’installation n’est pas remplie avec la pompe de
remplissage solaire Junkers)
Leidingen isoleren Isolation des conduites
f
Gebruik voor de isolatie van de leidingen buiten UV-besten-
dige materialen en materialen die bestand zijn tegen hoge
temperaturen (150°C).
f
Isoler les conduites à l'extérieur avec des matériaux résistant
aux UV et aux températures élevées (150°C).
f
Gebruik voor de isolatie van de leidingen binnen materialen
die bestand zijn tegen hoge temperaturen (150°C).
f
Isoler les conduites à l'intérieur avec des matériaux résistant
aux températures élevées (150°C).
4. SOLARSTATION INSTALLEREN 4. INSTALLATION DE LA STATION SOLAIRE
4.1 Plaatsing in opstellingsruimte 4.1 Position dans le local d’installation
Voorzichtig: Beschadiging van het solarstation door
warmtestuwing!
Prudence: Station solaire endommagé par l'accumula-
tion de chaleur!
f
Zorg ervoor, dat de ventilatiegleuven bovenaan en
onderaan in de isolatie geopend zijn.
f
Veiller à ce que les fentes d'aération dans les par-
ties supérieure et inférieure de l'isolation thermique
soient ouvertes.
f
Om de temperatuursensor gemakkelijker te kunnen aanslui-
ten moet het solarstation (2) in de directe nabijheid van de
solarboiler (1) worden gemonteerd.
f
Pour pouvoir raccorder plus facilement les sondes de tempé-
rature: monter la station solaire (2) à proximité immédiate du
ballon solaire (1).
f
Zorg voor voldoende ruimte voor het expansievat (3) en het
opvangvat (4).
f
Veiller à ce qu'il y ait suffisamment de place pour le vase
d'expansion (3) et le récepteur (4).
6 720 613 769 (2008.10 BL-NL/FR)
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junkers AGS 10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junkers AGS 10E in the language / languages: Dutch, French as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info