636783

Junker JM46GA50 Manual

30
Zoom out
Zoom in
Previous page
1/92
Next page
30
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
@ or A button to set the cooking time and restart the
microwave.
Cancelling operation
Press and hold the
† button for approximately 4 seconds and
turn the function selector to the zero position.
Notes
■ When you set the function selector to x, the highest
microwave power setting always lights up as the proposed
setting.
■ If you open the appliance door during cooking, the fan may
continue to run.
MicroCombi operation
This involves simultaneous operation of the grill and the
microwave. Using the microwave makes your dishes ready
more quickly, but they are still nicely browned.
You can switch on all microwave power settings.
Exception: 900 watts
Setting Microwave Combi operation
Example: microwave 360 W, 17 minutes and hot air 3 190 °C.
1. Set the type of heating using the function selector, and the
temperature using the temperature selector.
2. Press the button for the microwave power setting you require.
A suggested cooking time appears.
3. Use the @ or A button to set the cooking time.
4. Press the † button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Combination mode has finished. You can stop
the audible signal by pressing the
0 button.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
†
button briefly. The programme will then continue.
Pausing operation
Press the
† button briefly. The oven is paused. Press the†
button again to continue operation.
Changing the cooking time
This can be done at any time. Use the
@ or A button to change
the cooking time.
Changing the microwave power setting
Press the button for the new microwave power setting. Use
the
@ or A button to set the cooking time and restart the
microwave.
Cancelling operation
Press and hold the
† button for approximately 4 seconds, turn
the function selector and temperature selector back to the zero
position.
Automatic programmes
The automatic programmes enable you to prepare food very
easily. You select the programme and enter the weight of your
food. The automatic programme makes the optimum setting.
You can choose from 15 programmes.
Always place the food in the cold cooking compartment.
Setting a programme
When you have selected a programme, set the oven. The
temperature selector must be in the zero position.
Example in diagram: Programme 2 with a weight of 1
kilogramme.
1. Set the function selector to automatic programmes X.
The first programme number appears in the display.
2. Use the @ or A button to select the programme number.
3. Press the h button. The weight suggestion 0.50 kg appears
in the display.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junker JM46GA50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junker JM46GA50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info