636787

Junker JM26AA52 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found on the right-hand side when you open the appliance
door. To save time, you can make a note of the number of your
appliance and the telephone number of the after-sales service
in the space below, should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the purpose
of heating food. Class B states that the appliance is suitable for
private households.
Technical data
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
The microwave does not work. The door was not fully closed. Check whether food residue or debris is
trapped in the door.
The Start button was not pressed. Press the Start button.
It takes longer than before for the
food to heat up
The microwave power level setting was too
low.
Select a higher microwave power setting.
A larger amount of food than usual has
been placed in the appliance.
Double the amount – double the time.
The food was colder than usual. Stir or turn the food during cooking.
The turntable makes a scratching or
grinding noise.
Dirt or debris in the area around the turnta-
ble drive.
Clean the roller ring and the recess in the
cooking compartment.
Microwave operation has been can-
celled for no apparent reason.
The microwave has a fault. If this fault occurs repeatedly, please call the
after-sales service.
"M" appears in the display. The appliance is in demo mode. Press and hold the Start button and the Stop
button for approx. 7 seconds.
Demo mode is deactivated.
Error message Possible cause Remedy/note
E no.
FD no.
After-sales service
O
Input voltage AC 220 - 230 V, 50 Hz
Power consumption 1450 W
Maximum output power 900 W
Microwave frequency 2450 MHz
Fuse 10 A
Dimensions (HxWxD)
appliance 382 x 594 x 388 mm
cooking compartment 208 x 328 x 369 mm
VDE approved yes
CE mark yes
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junker JM26AA52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junker JM26AA52 in the language / languages: English, German as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Junker JM26AA52

Junker JM26AA52 User Manual - Dutch, French, Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info